akif tekin
New Member
thank you sir
"MEHMETSIRAY":39if1e2l" said:ARZU HANIM MUNICIPALITIES HAVE A MUST HAVE LIST OF LOCATIONS WE ARE DOING A THREE-DIMENSIONAL DESIGN. IF YOU HAVE THE OPPORTUNITY TO PUT THE LIST OF LOCATIONS ORGANIZLY IN THE PROGRAM AUTOMATICALLY, IF YOU HAVE THE POSSIBILITY TO PUT THE LIST OF LOCATION ORGANIZED, I AGREE. location number -- location name -- area -- floor -- wall -- ceiling M1 -- Living room -- 25.47m² -- parquet -- satin paint -- satin paint M2 -- Kitchen -- 12.30m² -- tile -- tile -- satin paint
Hello, The object you have added a picture of Extended object[/ b] command. -Draw the geometric shape with the line or route command. -Click the Draw/3b Geometric Objects/Extended object command. -Select the shape you created with lines. Press the right button. A virtual image of the geometric shape will be created. Press the left button to place the drawing. -Enter the object properties by double-clicking on the object you have placed. -Define the object thickness from the Length line in the dialog that opens. -Determine the handle from the plan view. - Type 90 degrees in the Rotation Angle X line. In the perspective view the object will be rotated around the X axis. Press OK to exit the dialog."akif tekin":3lviul6d" said:greetings, I want to make a 3d object with a base width of 260 and an upper width of 180 and narrowing upwards, how can I do it?
"azad":3an0ka81" said:Is there a way to open demo version drawing in normal version
"teknick":dvtx86uh" said:Zone edge problem! v.6.53 if the elevation of the walls is different from 0, even if we draw the edge of the zone, then the zone creation tool does not see the zone edge while creating the zone... Example: Let's draw a room with 4 walls and change the wall level. Let's give it as 1m, then let's divide the room in half with the edge of the zone and try to create two different zones, such as parquet and ceramic... At this moment, the zone creation tool will not see the zone edge and will assign a zone to the whole room... Solution: draw and divide the walls at the normal level and divide the walls. Change the floor level and the floor level later on... The solution is quite easy for 4 side walls, but in a structure where elevator and stairs are side by side and many different walls are combined, doing it this way causes a lot of trouble... Demanding that the area edge feature overcomes this problem I'm trying... Please help if there is another way... Thanks, good work...
To resolve this message: 1. Exit the program 2. Right click on the program shortcut on the desktop 3. Run the program with "Run as administrator" from the drop-down list 4. After the program opens, load the project and get the report. Good work ..."KUBA2009":txaft1mx" said:the attached file contains a drawing where I will get the tax account and the error image it gives at the end of the command