Insights on Using Architectural Design Questions

[RauLWalker]

Re: Opinions about the use of ideCAD Architecture 7 questions For example, now I drew a profile object on a project, I said properties with the right button, I opened it once, I closed it, I wanted to open it for the second time, it gave this error, I usually encounter this problem in every project

 

[KUBA2009]

Warning and library problem when transferring DWG Hello, after transferring dwg in version 7.15, the following warning appears on the screen, what is the reason?

 

[admin]

Re: comments questions about using ideCAD Architecture 7 Please submit your projects. See:

You do not have permission to view link Log in or register now.

 

[erturan]

Re: Opinions about using ideCAD Architecture 7 questions When I want to print out the image that I have rendered from idecad, I cannot fully cover the image on paper. The picture on the paper is as shown in the attachment.

 

[YasinTezel]

Re: Opinions about using ideCAD Architecture 7 questions

When I want to print out the image I rendered from idecad, I cannot fully cover the image on the paper.The image on the paper is as shown in the attachment.

Hello. Go to Project --> Drawing menu. Click "Choose window" in the dialog. Click Select and use the corner points of the Picture you will print out to determine the rectangular drawing border. If you use the Scale according to the paper option in the layout and scale section. The picture will be stretched according to the paper size. If you want, the picture can be centered with the parameters Origin X and Origin Y. You can print it with Preview and Print button.

 

[Arzu Dural Gök]

Re: Opinions about using ideCAD Architecture 7 questions Hello, Add the render you received to the drawing by typing the width 29.7 height 21 in the picture command settings (a4 dimensions). pick it up. Mark the scale according to the paper. While rendering, if A4 paper size is selected in the render settings and rendered, there will be no deformation in the paper fit process. You can also call the renders to the painting/painting programs and print out from there. Best regards

When I want to print the image I rendered from İdecad, I cannot fully cover the image on the paper.

 

[erturan]

Re: Opinions about using ideCAD Architecture 7 questions

Hi, Add the render you received to the drawing by typing the width 29.7 and the height 21 in the image command settings (A4 dimensions ) With the window option in the output settings, select the outer contour of the picture by enclosing it in the selection window. Check the scale according to the paper. While rendering, if A4 paper size is selected in the render settings and rendered, there will be no deformation in the paper-fitting process. Sincerely,

When I want to print out the image I rendered from İdecad, I cannot fully cover the image on paper. The picture on the paper is as shown in the attachment.

Hello; I have been getting my printouts as you have said (paper dimensions, window selection scale, etc.) can i see?

 

[Arzu Dural Gök]

Re: Opinions about using ideCAD Architecture 7 questions Open a sheet in A4 size. Add the picture to the layout design and set the picture dimensions to A4 dimensions. Select the layout in the print settings and set the scale to 1. Set margins to zero. It will fill the paper completely. If it still does not print, your printer may not support marginless printing.

 

[erturan]

Re: Opinions about using ideCAD Architecture 7 questions

Open a sheet in A4 size. Add the picture to the layout design and set the picture dimensions to A4 dimensions. Select the sheet in the print settings and set the scale to 1. Set the margins to zero. It will fill the paper completely. If it still does not print, your printer may not support printing without margins.

Hello, I tried to print out the project you sent, the image was like the attached image, there is little white left on the edge again.( the output paper you received is % Does it cover 100? ) I think the picture does not cover the paper 100% because of the plotter, is this definitely a problem with the printer?

 

[YasinTezel]

Re: Opinions about using ideCAD Architecture 7 questions Hello, I tried to take a printout in the project you started, the image was like the attached image, again there are few whites left. (Does your printout cover 100% of the paper? ) I guess because of the plotter. The image does not cover 100% of the paper, is this definitely a problem with the printer? Thank you for your interest Ms. Arzu[/quote] Hello. Below are the technical specifications for a sample printer. When you print, there is a non-printable area on 4 sides of the page. You can learn this from your printer's technical documentation. Specifications Print quality (best) Color: Up to 1200 x 600 dpi Black: Up to 1200 x 600 dpi Number of print cartridges 4 (one each cyan, magenta, yellow, black) Compatible ink types Paint-based (colored); pigment-based (black) Non-printable area (sheet) 5 mm (top), 5 mm (right), 5 mm (left), 12 mm (bottom) Minimum guaranteed line width 0.04 mm ( ISO/IEC 13660:2001(E)) Percent line precision +/- 0.2%

 

[KUBA2009]

Re: Feedback questions on using ideCAD Architecture 7

Please submit your projects. See

You do not have permission to view link Log in or register now.

related error warning when exporting as dwg normal size of the file is 36.3mb compressed cde file size is 32.9mb but below 6, 0012 is only 327 kb in the old version.

 

[KUBA2009]

Re: Opinions about using ideCAD Architecture 7 questions Also, when moving or columning in the program, selecting the object and determining the base point, there is a problem with the image scale when selecting another part of the entire drawing on the screen with a zoom window. I tried to explain this in the picture I attached. It does it not only in one project, but in all projects in version 7.15 --- I don't know if it's a problem with pc, but there was no such problem in version 6.54. windows version i can use vista service pack 2 32 bit operating system pc feature in general (HP intel core 2 Quad 2.4GHz 2gb ram) I will also have some suggestions. 1- Adding all commands to the command line. so that we can move the shortcut file we have set to all PCs and easily move the command line or ctrl + hot keys without setting it again and again. 3- There is a problem with automatic scanning sensitivity, it does not work like other CAD programs. The scanned parts in the section in the file I attached were made with automatic scanning, but I cannot make the wall parts. --- 4- Showing the area and x, y coordinates of the objects drawn with the route object with a command or in the feature. In order to do this, it is necessary to write the coordinates on the screen with the text command, by stopping the coordinates with the line command on each corner and noting the numbers one by one from the coordinate box. command, copy the coordinates with ctrl+c, paste them on the screen, and then dwg imprt to the ide. I couldn't find an easier way to make the coordinate lists in the file I added. it seems. I flowed.

 

[erturan]

Re: Opinions about using ideCAD Architecture 7 questions Hello, As seen in the pictures below, the inside of the glass is visible while I am working. After rendering, the inside is not visible, what should I pay attention to to ensure the visibility of the inside of the glass?

 

[Bolvadinim]

Re: Feedback questions about using ideCAD Architecture 7 Hello. I searched for the Quick Move Command in the Architectural program and could not find it. What is the reason? Also, yesterday, my article on the subject was removed without reply. What is the reason?

 

[Ismail Hakki Besler]

Re: Opinions about using ideCAD Architecture 7 questions

Hi. I searched for the Quick Move Command in the Architectural program and could not find it. what is it?

User "Bolvadinim" with IP number 46.155.254.4 deleted the message USERNAME USER IP TIME ACTION Bolvadinim 46.155.254.4 Feb 12, 2012, 20:01 Post deleted » Re: Comments on using ideCAD Architecture 7 questions

 

[Bolvadinim]

Re: opinions on using ideCAD Architecture 7 questions

Hi. I searched for the Quick Move Command in the Architectural program and could not find it. What is the reason? Also, yesterday, my article on the subject was removed without any reply. What is the reason?

User "Bolvadinim" with IP number 46.155.254.4 deleted the message. USER NAME USER IP TIME ACTION Bolvadinim 46.155.254.4 Feb 12, 2012, 20:01 Post deleted » Re: Comments on using ideCAD Architecture 7 questions

Hello Mr. İsmail. Well, let it be "Deleted" as you said.. The main question remains unanswered...I searched for the Quick Move Command in the Architectural program and could not find it. What is the reason?

 

[Ismail Hakki Besler]

Re: opinions on using ideCAD Architecture 7 questions

Hello. I searched for the Quick Move Command in the Architectural program and couldn't find it. What is the reason? Also, yesterday, my article on the subject was removed without any response. 254.4 Feb 12, 2012, 20:01 Post deleted » Re: Opinions about using ideCAD Architecture 7 questions

Hello Mr. Ismail. Well, as you said, "Deleted".. The main question remains unanswered...[ b]I searched for the Quick Move Command in the Architectural program and could not find it. What is the reason? [/b]

You do not have permission to view link Log in or register now.

 

[admin]

Re: Opinions about using ideCAD Architecture 7 questions

Hi, As seen in the pictures below, the inside of the glass is visible while I'm working on it. what should I pay attention to?

Increase the transparency value in your glass material.

 

[Arzu Dural Gök]

Re: opinions on using ideCAD Architecture 7 questions Hello, you can review the different values and their results in the link below. If you keep the reflection values less than in the example and increase the transparency even more, you can achieve the desired result. Good work

You do not have permission to view link Log in or register now.

Hello, As seen in the pictures below, the inside of the glass is visible while I am doing my work.

 

[erturan]

Re: Opinions about using ideCAD Architecture 7 questions

Hi, you can review the different values and their results in the link below. If you keep the reflection values less than in the example and increase the transparency, you can get the result you want. Good work

You do not have permission to view link Log in or register now.

Hello, As you can see in the pictures below, the inside of the windows is visible while I am doing my work. After rendering, the inside is not visible, what should I pay attention to to ensure the visibility of the inside of the glass?

Thank you Ms. Arzu, I benefited from the example. but I still couldn't get the exact image I wanted. When I looked from the outside, I could not see clearly through the window. Could it be because of the light outside? direction of light?