German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish this column beam system has no bearing feature other than its own weight. I also do not understand why they needed such heavy masses. they could solve a very light system with alucobond coating. Frankly, you don't think it will be very economical if we say they thought about it in terms of cost.
Opinions questions about using ideCAD Static 7
- Thread starter Ismail Hakki Besler
- Start date
cassabotanic
New Member
"SCETCHER":32xtvmg7" said:
there was absolutely no problem... I just placed ladders on both sides and made the necessary geometry checks... I corrected and analyzed it, it gave a good report... I downloaded the project exactly as I downloaded it and analyzed it without making any changes. It did not cause any problems, but there are some errors in the geometry control, I think it should be fixed... I am sending the project with the geometry controls done and the ladder added..."SCETCHER":27y3vppl" said:
cassabotanic
New Member
Re: graphics card overheating problem
Move the mouse over the menu above and right click. remove it.The problem is solved."dester":2qdeor3n" said:
Arzu Dural Gök
New Member
Programs for reporting bugs on the forum
You do not have permission to view link
Log in or register now.
Mr. Sinan, please read the above rules again. We understand that you are upset, but writing dozens of messages in this way neither benefits us nor does it benefit you. Let's repeat it once more: If you cannot get us to remove the problems you encounter on our computer, you will probably continue to have the same problems in new versions. Unfortunately, when the problems are mentioned in the forum a certain number of times, they do not fix themselves. I repeat again what you need to do: a) Open the project you are having trouble with in the video. b) Repeat the same steps in the order in the video. See if the problem reoccurs. Let us know the result. (The problem appeared/did not occur again in the same way) c) If the problem can be repeated for you, send the project you took the video of without making any changes to it. Unfortunately, you are the only one experiencing such problems, except for the occasional error notification from our other users. does not reflect on us. Do not perceive this as "you are the problem", 99% of you are doing something that we did not do, or something is different on your computers, we cannot experience and examine the problem because we cannot(can) do the same here. In the light of this information, I will delete your "program keeps crashing" type messages that do not provide clear and concrete information from now on. With so many messages, it's hard to catch and track real issues.
System recommendations as of now to work efficiently with the program: Intel core i5-2500/AMD phenom II X4 975 or higher processor (Intel i7-2600 recommended) 8 GB RAM (12 or 16 GB recommended) 32/64 bit Windows Vista or Windows 7 operating system (64-bit Windows 7 is recommended) Nvidia GeForce GTS450 or higher graphics card (GTX 560, Quadro 2000 or Quadro 4000 can be considered as better options) 1920x1080 monitors are now recommended because they are cheaper. Intel Core i5-2410M or higher processor for laptop (core i7-2630QM recommended) 8 GB RAM (12 or 16 GB recommended) 32/64 bit Windows Vista or Windows 7 operating system (64 bit Windows 7 recommended) ) Although the program can be worked with external Nvidia graphics card ATI graphics cards, it is recommended for CAD work because the opengl support of nvidia series cards is more successful.
The arrows you marked are not the calculation axes, but the arrows showing the reinforcement validity distance of the calculation axes. Calculation axles are automatically extended up to the slab limit. You do not need to redraw the tile to update it, you can set the validity distances and shift the tile calculation axes with the relevant command from the toolbar that opens when you enter the tile command.
These recommendations are recommendations for new systems and for efficient operation, they are not minimum requirements. If you are not going to use the calculation option with the tiles in the static program, if rendering (grass, displacement) is not your top priority in architecture, you can easily work with lower configurations. (Especially if you are not going to make a solution with tiles, you can easily work with 7 on the machine you are working with version 6) You are right about the 32-bit RAM limitation, but we do not recommend 32-bit operating systems and programs for new computers, 32-bit is gradually becoming obsolete as 64-bit versions of programs are released. ...
In the design of the hollow block floor, the weight of the hollow block should be taken into account, and the number of hollow blocks should be given and the mold size should be calculated for the presence of hollow blocks... DUE TO THIS SITUATION, WE HAVE MANY PROBLEMS WITH EMPLOYERS... WHAT DO IDECAD AUTHORITIES THINK ABOUT THIS SUBJECT... WILL A WORK BE DONE?