Opinions questions about the use of Reinforced Concrete Design

Re: Opinions about using ideCAD Reinforced Concrete 8 questions Hello, It would be nice to write the diameter / spacing information under the stirrup drawing in the rib beam drawing details. Just like the main beams.
You do not have permission to view link Log in or register now.
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
"MaFiAMaX":ra29xai4" said:
Hi, It would be nice to write the diameter / spacing information under the stirrup drawing in the rib beam drawing details, just like the main beams. url=https://hizliresim.com/aL7GvR]
aL7GvR.png
[/url]
Click to expand...
Hi Mr. Erhan, Your request has been noted. Good work.
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
"sultanfatih":v9z13bea" said:
Can you add the table of contents at the end of the reports? You can click the "Contents" line from the "Image" menu and print the pages that appear.
Click to expand...
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions Reinforced concrete calculation axis is not deleted/added in raft foundations.
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
"ihsanozturk":24eq7mei" said:
Reinforced concrete calculation axis is not deleted/added in raft foundations.
Click to expand...
Hello, "Draw reinforced concrete calculation axis next to the slab command, Because the commands "Change the geometry of the reinforcement calculation axis and delete the Reinforced Concrete Calculus axis" are common, they are not put back into the Raft foundation. The commands here can be used. Currently, the Delete Reinforced Concrete Calculation axis command does not work, it will become operational with the next update.
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions Hello 1. When 12 16 20 is selected in the selection of continuous basic body reinforcement, 12 is selected again when you remove 12 and say OK, save and exit the program and re-enter the program. change is not taken into account. It would be great if we could open a new column at the end on the 2nd quantity page and see the total of thin and thick iron for the elements.
 
Re: Opinions and questions about using ideCAD Reinforced Concrete 8 Is there a 32 bit version of idecad reinforced concrete 8?
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
"alponur":16er8zug" said:
Is there a 32 bit version of idecad reinforced concrete 8?
Click to expand...
ideCAD 8 only works on 64 bit Windows operating system .
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions Hello 1. When 12 16 20 is selected in the selection of continuous basic body reinforcement, 12 is selected again when you remove 12 and say OK, save and exit the program and re-enter the program. change is not taken into account. In our case notes. Thank you. It would be great if we could open a new column at the end of the 2nd quantity page and see the total of thin and thick iron for the elements. If you want a different information, can you explain?[/b] In addition to the 3rd reinforcement selection window, if there is a setting in the element properties and use irons with the following diameter in this element. Currently, by using the Reinforced Concrete dialogs, it is possible to select the desired diameter and quantity of reinforcement for the desired element manually. You can try this method. Make equipment selections. Analyze. Lock the reinforcements of the elements that will use active reinforcement selections from the Reinforced Concrete dialogs. Change the reinforcement selection as you want to use in other elements and analyze again. Reinforcement selections for non-locking elements will be made using the last selected diameters. I will also forward your request to arge.
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions HELLO FRIENDS... I'M FACED WITH A PROBLEM. WHEN I CHANGE THE CURTAIN REINFORCEMENTS, FOR EXAMPLE, I MAKE THE WATERPROOF CURTAINS DUSEY REINFORCEMENTS OF 12 WHICH IS 12 AND THEN I MAKE THE BASIC APPLICATION, WHILE 12 AND 10 REINFORCEMENT DOES NOT GIVE THE NUMBERS AND THE DETAILS. IN THE FUNCTIONS, SECTIONS DO NOT DRAW CONTINUOUSLY ON THE FUNDAMENTS AND THE SECTION CREATING PROCESS DOES NOT OCCUR AUTOMATICALLY AND BECAUSE THE SECTION LINE IS NOT EXCEEDED. IS IT ONLY I HAVE THIS PROBLEM OR I HAVE MET FRIENDS BEFORE. GOOD WORK...
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
"zalman":1sfr3nxd" said:
HELLO FRIENDS... I AM FACED WITH A SUCH PROBLEM WHEN I CHANGE THE CURTAIN REINFORCEMENTS, E.g., WATERPROOF CURTAINS ARE 12 DUE. LUKE DO I POST BASIC application ALIRKEN 12 LIKE aND 10 LUKA SHIP is VERMIY the Contein the aND DETAILS. on a continuous in BASIC SOMETIMES SLICE not CIZ AUTOMATICALLY aND section line GECMEDIG IC's SLICE CREATING processing does not MODIFY THIS PROBLEM ONLY BENDER M YES OR BETTER ONCE encounter ARKADASLAR oldumu. II WORKS ...
Click to expand...
Hello, Can you add the project you are having trouble with?
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions I FACE THE PROBLEM WITH THE ATTACHED FILIZ PROBLEM IN BOTH FILES, TYPICALLY IN EVERY PROJECT...
 
Re: Opinions and questions about the use of ideCAD Reinforced Concrete 8 In the project you sent, foundation sections are given continuously. I didn't see any problem.
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
"YasinTezel" said:
Continuous foundation sections are given in the project you sent. I didn't see any problem. I'M NOT TALKING ABOUT THE OPENINGS, I'M SURE I DID NOT SAY I SHOULD TALK ABOUT THERE WHILE I WAS BUYING THE BASIC APPLICATION PLAN, ACTUALLY, THIS SITUATION HAS ALSO COME INTO PRINTED IN PREVIOUS VERSIONS...
Click to expand...
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions No section is given automatically. I'm taking this in our notes. You can use the Formwork/Foundation Plan Section command by adding it to the toolbar. It is explained on the following page.
You do not have permission to view link Log in or register now.
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions COMMAND IN THE RIBBON MENU I CAN ACTIVELY USE THE COMMAND ADDING A COMMAND LIKE LEAK OFF WHEN I ADDED ABOVE, BECAUSE IT IS LOCKED THERE, I CANNOT WORK ON THE OTHER SIDE...
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions It would be great if we could open a new column at the end on the 2nd quantity page and see the total of thin and thick iron for the elements Totals of thin and thick diameter iron are given in the reports . If you want different information, can you explain? For example, I can't see the total amount of iron in the column elements on the 2nd floor. For this I need to sum the 2 rightmost columns. If a new column opens at the end and writes the total.
 
Re: Opinions about using ideCAD Reinforced Concrete 8 questions Hello, I made the column name placement upside down. In the mold plan, a drawing is given as in the model. The column is drawn by default in the application plan. Am I missing something somewhere?
You do not have permission to view link Log in or register now.
 
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
"MaFiAMaX":3vpytttc" said:
Hi, I made the column name placement upside down. The drawing is given in the formwork plan as in the model. In the column application plan, it is as default Am I missing something somewhere?
Click to expand...
Hello Mr. Erhan, Changes made in the positions of the column names and dimensions are reflected on the mold plan. The location and position of the name and size information are fixed in the column application plan. It does not change. Good work
 
You must log in or register to reply here.
Back
Top