German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Re: opinions about using ideCAD Reinforced Concrete 8 questions hello ; I wrote recently, there were answers from idecad officials, but it was not enough for me. I don't think the equipment in the attached photo is sufficient. Could you please send the 2b version as an example?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Opinions questions about the use of Reinforced Concrete Design
- Thread starter Ismail Hakki Besler
- Start date
Ismail Hakki Besler
Administrator
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
Automatic arc curtain creation and automatic detail drawing in neither 7.xx nor 8.xx versions of ideCAD program There is no feature Also, ideYAPI's users do not have any obligation or obligation to do their projects on their behalf. However, the ideCAD program includes useful 2D drawing possibilities. You can produce this drawing manually using these possibilities. How to use 2D possibilities is explained in the program manual. You can request help from technical support and forum for 2D possibilities. Automatic spring curtain detail drawing to be evaluated on the sides is on the list of works to be done. good work."vuralmüh":2ggx0kqp" said:hello ; I wrote recently, there were answers from idecad officials, but they were not enough for me. Can you send me the 2b version as an example? This issue is not fully understood by me. Thanks in advance for your attention...
HakanŞahin
Administrator
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
Hello, In the project you added, a single rigid diaphragm appears on each floor. Either the project is not the one you mentioned, you added another project or you should add a screenshot so that we can see your question."nitasltd":r6ood2uj" said:Hi, I see more than one diaphragm in my project. It's like RD1 and RD2 but there is no such basis and I can't find it. Why am I getting this error? I wonder ?
HakanŞahin
Administrator
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
Dear user, There are 2 rigid diaphragms in the 1st basement floor of your system. (Due to the gap in the flooring..) You can see the rigid diaphragms from the 3D frame."nitasltd":34wc4qlu" said:Sorry I added the wrong project.
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions It gives different dimensions of the column sprout in the vertical expansion of the column, and different in the details in the basic application plan. I just noticed this problem. I looked at a project I did in the past, and it's like that.
Re: Opinions about using ideCAD Reinforced Concrete 8 questions Hello, I can't get color in idecad8.5 as in idecad 7 in drawings. So, for example, very dark fonts are used in the pattern plan. How can I use the drawing color and pen configuration in idecad 7 in idecad 8.5? Thanks.
HakanŞahin
Administrator
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
Unless you open a new project with the program's template projects, color and pen bolds are not active in the template. Which template are you working with? Classic white or classic black template used in idecad 7 are projects."nitasltd":2rcwotyl" said:Hi, I can't get color in idecad8.5 as in idecad 7. So, for example, very dark fonts are used in the formwork plan. How can I use the drawing color and pen configuration in idecad8.5? Thank you.
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
I think it was a problem caused by the graphics card update. I survived."aykut_k":iutyppse" said:I started getting an error like this. What can I do?
Re: Opinions about using ideCAD Reinforced Concrete 8 questions Hello, Attached is a simple one-story building. I couldn't do the stirrup tightening (I know it's not necessary) on the secondary beams. Can you help me. File:
You do not have permission to view link
Log in or register now.
Re: opinions and questions about using ideCAD Reinforced Concrete 8 hello, I am using ide8. There is a situation like this. A project that I have drawn in ide7 and which does not give an error, gives an error in the ide8 report. I have only analyzed ide8 without changing anything. Is it normal for it to be like this? Why is the regulation the same regulation?
HakanŞahin
Administrator
Re: Opinions about the use of ideCAD Reinforced Concrete 8 questions
Differences between 7 and 8 may be caused by some corrections and approach differences. If you add both projects, the error messages given will be caused by the changes we made. We can write that it is not."actombo":2ijc93gj" said:hi I'm using ide8. There is a situation like this when I draw a project in ide7 that does not give an error, ide8 gives an error in the report. I just analyzed ide8 without changing anything. Is it normal to be like this? Why might the same regulation give an error?
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
Hakan, my project is in the link below.ide7, there is no problem. When I opened the same project in ide8, it gave errors. You can also check it out. I couldn't understand"HakanŞahin":52vuttcf" said:Differences between 7 and 8 may be caused by some corrections and differences in approach. If you add both projects, we can write whether the error messages are caused by the changes we have made."actombo":52vuttcf" said:hi I'm using ide8. There is a situation like this. A project that I have drawn in ide7 and which does not give an error, gives an error in the ide8 report. I have only analyzed ide8 without changing anything. Is it normal for it to be like this? Why the same regulation may have made an error?
You do not have permission to view link
Log in or register now.
YasinTezel
Member
Re: Opinions about using ideCAD Reinforced Concrete 8 questions
Uninstall the installed version 8.5 and"AYDIN":1m8gramc" said:8.103 was already installed I've updated 8.5 on top I need to reinstall 8.103
You do not have permission to view link
Log in or register now.
You can install version 8.103 from Technical Support / Downloads page.