The elevation and height options in the pier macro are related to the pier. - In case of elevation difference on the facades of the building, the scaffolding macro allows you to gradually model the scaffolding with different options. You can model your scaffolds in pieces according to the slope of the ground with the elevation tab in the scaffold settings section. -Dimensions in the production of scaffolding system are; scaffolding height and width can be intervened in the program for good work"diriliş":18zhg9ws" said:In the Scaffolding Macro; There are elevation and height options. These are; -Is it related to the building? or -Is it to the only model of the scaffold? Greetings
When scaffolding is defined to a reinforced concrete project, the project is converted to a scaffolding project. In this case When you press the Analysis+Reinforced Concrete button, scaffolding analysis is performed. Scaffolding reports are also received from the optional reports section. Good work"diriliş":pcu6c8zv" said:I can't find an icon about Scaffolding Analysis. Is scaffolding analysis done automatically? Can we get reports from optional reports without analysis? Greetings
The material may not be defined. Define the material for the flooring as indicated in the link below. If the problem is not resolved, attach the project file."resurrection":1vwncmm7" said:although the project is in scaffolding mode, when we press the Analysis+design icon, the program stops working and gives an error. Therefore, it is not possible to perform scaffold analysis. What is the reason?