diagonal wall put window

B

bartayd

New Member
Hi, I want to put a window with a 90 degree angle to the full corner, or what would you suggest that will be a 3-cornered window, take it easy... When looking at the plan, it can be an L-shaped window or a 3-cornered window...
 
Re: INSERTING DIAGRAM WALL WINDOW Enter curved wall settings. Enter the number of curved wall points 1 in the Advanced settings tab. The value entered here determines the curvature sensitivity of curved/arc/circular walls. Typing 1 will draw the wall straight while drawing with the curved wall command. Just as we can put a curved window on a curved wall, even if we see it as straight, since this wall is actually a curved wall, we can easily place a corner window. Draw walls L , U , Z however you want. (With the curved wall command. Since we set the value to 1, it will be drawn straight.) Then select the desired window and enter its settings. Exit the dialog by ticking the slanted door/window in the Layout tab---type section. Use distance from the door window floating toolbar, turn it off (inactivate it) and hover over the wall. You will see that the window goes on the wall, curling around the corners. If you know the distance, you can place it by entering the value without making the distance use inactive.
 
Re: GORGEOUS WALL WINDOW God bless you, I have only one problem, I will open a new topic and maybe you can't see it here
 
You must log in or register to reply here.
Back
Top