German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish mimariproje
New Member
I have saved a layout prepared with a street plan one by one by taking the floor plans one by one. I cannot see the normal floor when I import it to draw the normal floor after drawing the ground floor.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
cad import problem
- Thread starter mimariproje
- Start date
It is possible that the drawings you imported have landed at a far point in the drawing area. In such cases, before importing 2d drawings, I recommend that you open an empty 2D drawing window and import it there. When importing, check the Block the imported objects and select the imported objects options. When the import process is finished, if you say zoom drawings with the drawings as blocks and selected, you will see the drawings. then I suggest you hold one corner and move it to the starting point by giving 0,0 from the coordinate box. What I have told is long, but it is not as complicated as it seems.
mimariproje
New Member
Thank you for your explanation, can you help me on how to open the 2b window? Also, how much is the student version and full license of this program?
From project menu / new 2D window"architecturalproject":kcf0gldv" said:thanks for your explanation, can you help me on how to open the 2d window.
You can get information about the sales by calling 0 224 220 67 17."mimariproje":kcf0gldv" said:and how much is the student version of this program and how much is the full license, can you help me in this regard.
mimariproje
New Member
There is a situation like that, I do not show the dwg files that I have imported in the perspective window, even though it will appear, I wonder if the plans should not be visible at a distance of floors high.
mimariproje
New Member
As you said, I managed to add the dwg files later and overlap them in the perspective window, but I have a problem to navigate in the perspective window, can I not hold the upper corner of one of the columns in the perspective window and overlap it with one of the lower corners of the other?