sloping floor design urgent

O

o_berdibek

New Member
hello, in the project I sent attached, I want to create an inclined floor from the middle to the right and left on the last floor, but I can't catch the elevations I entered from the inclined floor icon. How can I solve this situation
You do not have permission to view link Log in or register now.
fifty-fix_made.zip.html
 
Re: INCLINED FLOOR DESIGN URGENT!!! Mr. o_berdibek EK:GORUNUS Is the last layer as I have given in the appendix? (I fixed the left side) If it's not like that, then write down the jeans as I marked with red. Unver Ozcan
 
hello, thanks for your interest. Let me tell you, in the view you uploaded, the line you drew in red should be the height of the columns, 135 cm, 252.86 cm, and 414.86 cm, in order from the leftmost. There is also the same slope on the other side.
 
Mr. o_berdibek My suggestion: --Delete the old formwork plan where you will make the inclined floor, --Create the inclined beams, --create the inclined floors, complete the formwork plan, --Then copy the columns from the lower floor and the column elevations, --In some column-beam junctions; There may be level difference and joint errors in the beams, correct them. Take it easy Unver ÖZCAN EK: MOLD, YALA
 
"o_berdibek":2zimzzc0" said:
hello, in the attached project, I want to create an inclined floor on the last floor from the middle to the right and left, but I cannot catch the elevations I entered from the slanting icon, how can I solve this situation
You do not have permission to view link Log in or register now.
fifty-correction_yaplan.zip.html
Click to expand...
Hi, You can create italic tiles with the "Bevel Objects" command in the tiling helper toolbar. Good work.
 
You must log in or register to reply here.
Back
Top