Problem with the map

A

arembero

New Member
hello, my problem is when I take the column app drawing in the basement and other floors, the location of the curtains and columns change, they are close to each other and not where they are. I think it's a problem with the scale, but I use the 50 25 scale. When I use it here, it is wrong. What should I do? I would appreciate it if you could help me.
You do not have permission to view link Log in or register now.
 
Hello, I didn't see any problem with your question. For example, the S17 column misalignment you marked in the picture is given as misalignmentx=15, misalignmenty=10 cm. In the column application, the axis distance of these columns seems to be compatible with the given offset value and the program has scaled it according to the growth limits you have given. In short, there is no slippage. If you write more clearly as to what you expected to happen, but what was the problem, maybe we can provide more accurate help about what you want to do.
 
First of all, I was able to upload it this way because I didn't know how to add a picture. As for my problem, I marked the differences between the first picture I sent and the second one. When I took the scale from 50 to 25 in the first picture, the columns and curtains were not removed in the appropriate places, but later on, when I changed the scale, it started to sit in place. Only when I do it in 50 to 25 scale, I get sizzling like in the first picture, but I want to buy it.
You do not have permission to view link Log in or register now.
 
Hello, in the picture; For the illustration in the section you marked as number 1-, adjust the offset of the DP01 panel as 9.9 cm instead of 10 cm, and the offset of the PD09 panel as 14.9 cm instead of 15 cm. There is no problem in the section you marked as number -2. In the section you marked as number -3, define the nodal point of the S17 column so that it coincides with the 7-D suspension intersection instead of the 7-C axis. Good work
 
You must log in or register to reply here.
Back
Top