Is there any mistake or error in my project?

A

AKYÜZ

New Member
FIRST HELLO TO EVERYONE. I WAITING FOR YOUR SUGGESTIONS FROM MY VALUABLE COLLEAGUES, IF THERE ARE ERRORS OR DEFECTS IN MY PROJECT I UPLOADED. THANKS IN NOW. REGARDS... (NOTE: I HAVE INCREASED THE MOVING LOAD OF MANY FLOORINGS BECAUSE I HAVE BACKGROUND WALLS THAT DO NOT SIT FROM BEAMS. DO YOU LIKE THIS OR EVERY BATCH WALL SHOULD BE ENTERED AS A LINEAR LOAD.http://)
xdungh/EKEMEN.rar.html]http://s6.dosya.tc/server/xdungh/EKEMEN.rar.html[/url]​
 
Hello, The findings and suggestions for data entry in your project are as follows; -The elevation of the raft flooring defined for the elevator shaft and the elevation of the panels do not match. It is seen that the eaves floors D52-53-72-73 on the 4th floor are not connected to the relevant beams. It would be appropriate to define the left and right slab edges of the eaves as in the sample project. -5. For the D02 slab with -200 cm elevation on the floor, it is recommended to select the "Rigid diaphragm creation" option from the flooring properties. - "Linear slab load" command can be used for walls on slab slab. Good work
 
You must log in or register to reply here.
Back
Top