I am getting an insufficient equipment error, how do I know where

[Fuat1]

Hello, I am determining the diameter of the reinforcement, I am doing the analysis, as 14/17, it determines the bottom and top reinforcement in the x and y direction, porgram subbasement + a 2-storey project, I want to increase it to 25, I get the error of insufficient reinforcement, how can I find out where it is insufficient or can we set the project to add extra to the places that do not automatically save? If you can look at the project in general, if I have a mistake, I would be happy if you correct it (I knowingly solved it with the 2007 earthquake regulation)

 

[Fuat1]

Re: Raft Reinforcement Range My 2nd question hello, I put a balcony in the form of a fringe on the basement floor (-280cm) and there is a balcony at the normal 0 level, when I edit the axis of the account, I choose the bottom one from the plan, how can I choose the top floor? My 3rd question is how can I find out if the stud beam is fully connected?

 

[unver]

Re: I get the error of insufficient equipment, where is insufficient, how do I understand Hello In the analysis settings; Earthquake regulation TDY2007 is seen. Make solution according to earthquake regulation TBDY2018. For the sub-basement layer;

You do not have permission to view link Log in or register now.

I recommend that you follow IDECAD's recommendation. Unver ÖZCAN

 

[Fuat1]

Re: I get the error of insufficient reinforcement, where and how do I understand it

Hello In the analysis settings; Earthquake regulation TDY2007 is seen. Make a solution according to earthquake regulation TBDY2018. For basement floor; [url =https://www.idecadsupport.com/forum/viewtopic.php?f=5&t=7170&p=31007&hilit=su+basman#p31003]viewtopic.php?f=5&t=7170&p=31007&hilit=su+basman#p31003[/ url] I recommend you to follow IDECAD's suggestion Ünver ÖZCAN

Sir, I forgot to add it at the beginning, I solved it with 2007 on purpose

 

[unver]

Re: I get the error of insufficient equipment, where is insufficient how to understand Why

 

[Levent Özpak]

Re: I get the error that the reinforcement is insufficient, where is it insufficient, how do I understand

Hi, I am determining the diameter of the reinforcement, I am analyzing 14/17, it determines the bottom and top reinforcement in the x and y direction. a project I want to put 25 times, I get the error of insufficient reinforcement, how can I find out where it is insufficient or can we set the project to add extra to the places that do not automatically recover? In the project, the raft foundation main reinforcement axles work under minimum conditions. Therefore, minimum reinforcement is placed on the section. In this case, the main reinforcements are placed according to the minimum spacing and pursantage given in the raft laying parameters. When the reinforcement spacing is made 25 cm. <As gereken olduğu için donatı yetersizliği uyarısı vermesi normaldir.

 

[Fuat1]

Re: Raft Reinforcement Range

2nd question hello, I threw a eaves-shaped balcony on the basement floor (-280cm) and there is a balcony at the normal 0 level when I will edit the account axis. he chooses the lower one from the plan, how can I choose the upper floor? My 3rd question is how can I understand whether the stud beam is fully connected?

 

[Levent Özpak]

Re: Raft Reinforcement Range

2nd question hello, I put a eaves-shaped balcony on the basement floor (-280cm) and there is a balcony at the normal 0 level when I will edit the account axis. it selects the lower one from the plan. How can I select the upper tile?

Select the D16 tile. Press the right button. Click the Drawing order/Send to background line from the drop-down menu. In this case, you will select the upper tile.

My 3rd question How can I tell if the stud beam is fully connected?

In the analysis model window, the beam is connected to the other beam with a rigid arm. In the beam reinforced concrete dialog and beam expansions, the beam support appears as the beam to which it is attached. In the Beam Information and Static Results report, the name of the element to which the beam is connected appears as a beam. Good work

 

[Fuat1]

Re: I get the error of insufficient equipment, where is it insufficient, how do I understand Thank you very much for your answers, we get instant answers from the forum