How to identify stair tread plate

H

Haydar_balo

New Member
Hello there ; how to define stair tread plate in a steel project. In ideYapı sample projects, there is a project with a defined step plate, but there is no data on how to make the defined plates. It is possible to create a flat plate with the draw continuous line command, but if you can help on how to make the curvilinear step plate in the sample project, good work.
 
Re: DEFINITION OF STEP PLATE IN STEEL PROJECT Hello; Route, etc., so that you can draw two-dimensional drawings other than continuous lines. commands are available. You can create a closed polygon, select all of them and use the right-click convert - sheet command. Good work.
 
Re: DEFINITION OF STEP PLATE IN STEEL PROJECT hello ; Thanks in advance for your quick response, I have attached the image of the stair plate available on the ideyapı site, considering that I could not fully explain myself.
 
Re: DEFINITION OF STEP PLATE IN STEEL PROJECT Hello Unfortunately, the shape we wrote is not possible, the method you mentioned can be used for flat plate section, but what I want is a more specific drawing, which is to obtain a drawing close to the existing section in the sample projects, the moment value of the created section, With the commands you give to obtain a useful section with the radius of inertia and strength values, the existing sections are loaded in the section load section menu, but the section in the project image is not included in the section elements. I wanted to get information about how the current section can be created as a polygon, thank you for your interest and feedback.
 
Re: DEFINITION OF STEP PLATE IN STEEL PROJECT Hello; The information above is that you can obtain this 2-dimensional geometry with the line command from the plan, not the section load.
 
You must log in or register to reply here.
Back
Top