ground safety negative and mode number insufficient error

S

semihguner

New Member
hello idecad stat. i am new user. I encountered some errors in my project that I added the link to. I couldn't fix the warnings of negative ground safety and insufficient number of modes. I would appreciate it if you could help ground ta0.13 tb0.15
You do not have permission to view link Log in or register now.
 
Hello, *When the number of Mods is increased from the building tree, for example, 36 or a higher value is sufficient. *Even under vertical loads only, the average stress value remains above the ground safety. Soil improvement can be done. Other findings and suggestions; *There is a piece of beam named K36 under the P88 panel. (It is given as a warning in the geometry control.) *Ductility level was selected as normal in the Analysis Settings, but the R coefficient was entered as 6. R=4 must be entered. * In the project, a separate foundation system was created under each dilatation. In this case, we recommend entering the dilations as separate projects. *If the ground group is C or D, it would be appropriate to make a superstructure interactive solution. Good work
 
Mr. Levent First of all, thank you for your answer. I got the ductility level high. I got R=7, I got the mode number 37, that problem was fixed, but I still get the negative ground safety warning. I will be glad if you can help. Good work.
 
hello, I just started using idecad. I have the same error in my project, so how do I increase the number of mods? I will be very happy if you answer
 
"new engineer":2sfnrhmc" said:
hi, I just started using idecad. I have the same error in my project, but I wonder how I will increase the number of mods? It can also be caused by errors, so it will be more useful if you add your project.
Click to expand...
 
Have a nice day. I'm solving a 6-storey building, I'm just thinking of laying a raft foundation, that's what it is intended to do, but the ground security is insufficient (Ground=15t/m2). I can't expand on 2 sides of the building. If the ground security is 20, it saves. What would you recommend? Or is there a method you can recommend as the most cost-effective ground improvement method? Thanks in advance, take it easy.
 
"batuhann28522":191o5030" said:
"NYILMAZ":191o5030" said:
It's hard to say anything without submitting the project.
Click to expand...
At the moment, ground safety does not give 20 errors. Here is the download link:
You do not have permission to view link Log in or register now.
thanks
Click to expand...
Could you please upload it to another upload site? What kind of upload site is this?
 
You must log in or register to reply here.
Back
Top