Floor index in drawings

[damlatpzz]

Hello, I faced a similar problem before, but; I couldn't solve it with the same method. I am deleting the floor indices in the index section from the floor general settings. But it keeps throwing different element indices in the same floor. As an example, I am adding two different screenshots. The drawing I took with the settings above is as follows. I would be very happy if you share your solution. I wish you good work...

 

[s_f_d]

You can write a sign, one less than the number of rigid diaphragms on the relevant floor, in the index section. Good work Sent via iPhone using Tapatalk

 

[Levent Özpak]

Hi, I faced a similar problem before, but I couldn't solve it with the same method. I delete the floor indices in the index section from the floor general settings. But it keeps throwing different element indices in the same floor. I add two different screenshots as an example .The drawing I got with the above settings is as follows. I would be very happy if you share the solution. I wish you a good work...

Hello, More than one rigid diaphragm may have formed on the floors. Just put a comma in the index column. In this case, the elements will not be indexed. Good work.

 

[damlatpzz]

Yes, 3 rigid diaphragms are defined, especially in the basement; I applied both suggestions, but the result was as follows. Again, just in case, I'll upload the project file, I'd be very happy if you could take a look when you're available.

You do not have permission to view link Log in or register now.

İZE_20.12.2016_(LADDER).ide85.html

 

[Levent Özpak]

Yes, 3 rigid diaphragms are defined, especially in the basement floor; I applied both suggestions, but the result was as follows, just in case, I'll upload the project file as well, I would appreciate it if you could have a look when you are available. //dosya.co/rm8yb84e58nj/REV]http://dosya.co/rm8yb84e58nj/REV[/url]İZE_20.12.2016_(MERDİVEN).ide85.html

There are 3 different diaphragms on the tower floor. You must write comma space comma for the tower floor There are 4 rigid diaphragm formations on the basement floor.You must write comma space comma space comma for the basement floor in the General Floor Settings Note: Intermediate landing on the basement floor (Select the relevant tiles and click the object properties command. In the tile settings dialog that opens, check the "Create rigid diaphragm" option in the Static tab. Analyze.)

 

[damlatpzz]

OK, thank you very much for your attention. I wish you a good day and good work..

 

[Apocalpyse]

Thank you very much. We gave you good health. Good work.