Curtains (KAS) problem

[sevinca]

HELLO HAPPY HOLIDAYS TO EVERYONE. IN MY ATTACHED PROJECT, IT GIVES INSUFFICIENT WARNING OF CUTTING SAFETY AND REINFORCEMENT ON P01-P02-P04 CURTAINS ON THE BASEMENT FLOOR. I DECREASED THE REVERSIBLE REINFORCEMENT IN THE RELATED CURTAINS, I INCREASED THE ROOF ROOF I INCREASED THE DIAMETER OF REINFORCEMENT LONGITUALLY, I INCREASED THE NUMBER OF REINFORCEMENTS IN THE HEADER ZONES, I REDUCED THE REINFORCEMENT RANGE IN THE MIDDLE ZONE, I INCREASED THE SCREEN WIDTH UP TO 35 CM, I DEFINED THE RELATED CURTAINS WITH ICON COLUMN ICON KATÜŞEŞEĞÜÇÜÇÜDÜŞÜŞÜŞÜĞÜŞÜ KATÜŞÜŞEŞÜDÜŞÜŞÜŞÜBİLLİ I WOULD LOVE TO HELP. GOOD WORK...

You do not have permission to view link Log in or register now.

 

[sevinca]

DEAR MANAGERS, YOU HAVE BEEN HELPING AS ALWAYS. THANK YOU FOR HELPING TO RESOLVE THE ISSUE I MENTIONED. I CONGRATULATE YOU. ALSO, IN A PROJECT I SOLVED IN IDECAD 7, I EXPERIENCED MAX. PURSANTAJ PROBLEM ON THE FLOOR-1 AND 2TH FLOORS, ABOUT 30 BEAMS. GOOD WORK AGAINST EVERYTHING

 

[HakanŞahin]

Hello, Since your question coincided with the holiday holiday, the answer was not possible immediately. A response will be given when your project is reviewed. Happy holidays.

 

[unver]

Hello, the corrected project is attached Also -- check the wall loads -- Add the stair loads -- I did not fix the column (B) errors, fix them by centering the columns Good luck Ünver ÖZCAN

You do not have permission to view link Log in or register now.

 

[HakanŞahin]

IN A PROJECT I SOLVED IN IDECAD 7, I EXPERIENCED A MAX. PURSANTAJ ISSUE IN APPROXIMATELY 30 BEAMS ON FLOOR-1 AND 2nd FLOORS SAME PROJECT SAME SYSTEM SAME SECTIONS IN IIDECADICHI BANK SOLUTIONS IN IDEECAD 8 SOLUTIONS GOOD WORKS AT ALL THINGS

Hello, We don't know of such a situation. I solved the project you added in version 7. A total of 43 errors appear. I opened the same project in version 8 and solved it, a total of 44 errors appear.