CONSOLE BEAM S ERROR IN CASSETTE FLOOR

2

23omer68

New Member
I'M DRAWING A SMALL PROJECT WITH THE ADJUSTABLE SETUP. I GET AN ERROR ON THE LEFT CONSOLE END BREAKS K09 K13 AND K16 BEAMS ALSO ... I ATTENDED THE BEAM SECTIONS CONTINUING FROM THE BACK, WE CANNOT MAKE THESE BEAMS SIZE BETTER, WE CANNOT MAKE THESE BEAM SIZES BETTER, DEMEDUNCHELL MANUALLY CAN WORK MANUALLY CANNOT DEVELOP THE SIZES OF THE CONNECTOR BEARINGS :
You do not have permission to view link Log in or register now.
 
Hi Beam console distance seems more than 2m, you cannot exceed the deflection limit by making horizontal beams. It is not possible to increase the beam width due to the column dimensions. Also check the beam loads. There are 0 values entered. When cantilever beams are made in 25/60 dimensions, deflection conditions are provided. In this case, deflection calculation is not required since it provides 1/5 in terms of size. TS500 13.2.1
 
You must log in or register to reply here.
Back
Top