Which regulations should be used in the steel program?

[Ismail Hakki Besler]

According to which regulations would you like the steel software that ideYAPI intends to release to calculate?

 

[mhanifiata]

I think it should be TS648, EC and ASD, Mr. Ismail. There should also be merging accounts. I think it's important to keep the software strong and reliable rather than price it reasonable. It is necessary to concentrate not only on calculating, but also on drawing. I have reviewed many software, all of them have weak points. The drawing, some focused on calculation, is on the sidelines. Some give drawings, there are no joints, no joint details, no joint calculations, standard type details. Entering the market with weak-looking software would be unnecessary and tiring. weakens the image of the company. I personally would consider allocating 10-12 thousand liras in the medium term for a domestic steel software that meets my demands. If ide is planning to produce cheap software, it should immediately turn away from this idea. If it will be limited to such structures, I would not consider investing, because we have already acquired such software. If there is no part drawing, parts lists, cnc database etc., there will be a need for other software, in which case it would not be my choice again. It should be able to integrate with idecad. that is, the database must be shared. The most common type of building I encounter is reinforced concrete at the bottom and steel at the top. sometimes a reinforced concrete basement, a steel mezzanine structure on top, sometimes a 10-storey structure with a steel roof at the top, sometimes a steel+reinforced concrete slab system. there should be no geometric constraints. It can transfer data to x steele and sap 2000. If there is a demo, I would like to see it and express an opinion accordingly. Best regards...

 

[cassabotanic]

I don't think TS 648 is very necessary. It is very incomplete, insufficient and not up-to-date. AISC 360 ASD 2010 and LRFD EC3 and Earthquake Regulations Must Be Regards

 

[saridurmus]

I think it's more important to have TS648, but not to be binding, EC should be as your friend generally limits "mhanifata". The idenin static database should be used in the program, so it becomes an integrated program. Drawing support should be sufficient (joint detail), welded and bolted options. Program limit general structure type should be selected, we wait a little longer as long as it does not remain on a certain (industrial type warehouses) subject.

 

[mhanifiata]

The profile database must be available for updating. Data files such as euro.pro and german.pro prepared for SAP 2000 should be readable.

 

[yapisalnet]

In my opinion, the most common problems faced by Steel Program Users are Analysis+joining calculation+drawing. a good program 1. The program should not restrict the design (that is, it should not go through certain templates) 2. Drawing The program should give beautiful drawings in both 2b and another program should not be needed to smooth the drawings (like dwg-based programs) 3. combination calculation is important ( most programs on the market do this As a result, half programs have to be used to calculate the project combination analyzed in analysis programs, which requires extra expense and a separate program knowledge and skill. 4. The analysis should be at least as comprehensive and easy to understand as the ide statics. It is my own views.

 

[mhanifiata]

I wonder if there is a demo, movie, picture, clue, indication, trace, mark, shadow......of the work of idestruct on steel.

 

[Ismail Hakki Besler]

I wonder if there is a demo, movie, picture, clue, trace, trace, mark, shadow......of the work of idestruct on steel.

ideYAPI The steel program continues to develop.

 

[cassabotanic]

I wonder if there is a demo, movie, picture, clue, trace, trace, mark, shadow......of the work of idestruct on steel.

There is. I know that they have developed it. Even more so, I examined the program at the Istanbul construction fair.

 

[mhanifiata]

I wonder if there is a demo, movie, picture, clue, trace, trace, mark, shadow...... of the work of idestruct on steel.

There is. I know they have developed a steel program. Even more, I examined the program at the Istanbul construction fair. Best regards

OK, but how will we see in Ankara? Why don't ide officials show a picture or something? why why why

 

[Ismail Hakki Besler]

I wonder if it's a demo, movie, picture, clue, indication, trace, sign of idestruct's work on steel , shadow.....is there.

There is. I know that they have developed a steel program. Even more so, I examined the program at the Istanbul construction fair. Best regards

OK, how will we see it in ankara. ide officials why is there a picture or something? why why why

At this stage, only five or six users with alfauser status have information about the steel program content. The user named Cassabotanic is our colleague we work with in our alpha group. None of our users outside of this group have any information. At this stage, the steel program does not share the content, when it will be released, what the price will be.In previous years, the program had already been showcased at construction fairs and was highly appreciated. Later, again, corporate policy As a requirement, we shifted a group of software developers from the steel program software group to the architectural and reinforced concrete software group and postponed the release date of the Steel program. Until the steel program announcement is made, "demo, film, picture, clue, indication, trace, mark, shadow" will not be because we planned it that way. Sincerely, İsmail Hakkı Besler General Manager

 

[mhanifiata]

Thank you for your clear explanation. I would like to have knowledge so that I can make my own plan. I respect your decisions.