System cannot be resolved error

S

sara

New Member
Hello, I am getting an error that the system cannot be resolved during the analysis in the project. There is no problem in the geometry control. I couldn't find any errors in the DN part.
 
Hello, There is a problem with the ladder model. Model the landings at floor level as slabs. You can use the default 2-armed ladder as the ladder. This way you can analyze.
 
Hello, I am getting the system cannot be resolved error, I cannot understand where the problem originates from, can you help?
 
first of all thank you for your feedback. At first, I did the analysis in this way, it was not a problem, then I made some changes in some columns and I started getting this error, as you said, I changed it and made a solution again, now the analysis is done, thanks for your help.
 
Pay attention to the basement floor level in the fehimesenler project, the basement ceiling and the foundation were on top of each other, I fixed it and solved it. There was no problem in the analysis.
 
You must log in or register to reply here.
Back
Top