Same reinforcement different sprout length problem

S

sonerkorkmaz

New Member
When I buy the basic application, different sprout length details appear in 16 column reinforcements. I take 3 different clamping sizes. How can I fix this situation. Sent from my SM-N960F using Tapatalk
 
"sonerkorkmaz":2s1v5cgo" said:
When I use the basic application, details of different sprout sizes appear in 16-column reinforcements. I get 3 different clamping sizes. How can I fix this situation. Sent from my SM-N960F using Tapatalk
Click to expand...
Overlay attachment of columns as per regulation , is done in the middle of the column. If the free lengths of the columns are different, the shoot lengths will also be different. If you attach the project file, we will examine it.
 
I HAVE THE PROBLEM OF DIFFERENT SPRING LENGTH ON THE SAME REINFORCEMENT DIAMETER IN THE BASIC APPLICATION. I HAD THIS PROBLEM AFTER THE UPDATE. I AM SENDING MY PROJECT ATTACHED. Thank you.
 
"Levent Özpak":1cli1lwn" said:
"sonerkorkmaz":1cli1lwn" said:
When I use the basic application, details of different sprout sizes appear in 16 column reinforcements. I take 3 different clamping sizes. How can I fix this situation. Sent from my SM-N960F using Tapatalk
Click to expand...
According to the regulation, the overlapping of the columns is made in the middle of the column. If the free lengths of the columns are different, the shoot sizes will also be different. If you attach the project file, we will examine it.
Click to expand...
Mr. Levent, there are variable floor heights, but the column lengths on each floor are the same. I sent an e-mail to my project [email protected]. it happened after the update.
 
You must log in or register to reply here.
Back
Top