Rigidified base plate defect

[gunay.17]

I am drawing steel project for the first time. I am getting the Rigidized baseplate error. I couldn't fix it anyway. I would be glad if you help. I have one more question, can I define 2 upn profiles as in the picture?

You do not have permission to view link Log in or register now.

[/url] Project

You do not have permission to view link Log in or register now.

 

[nurgulkaya]

Hello there; If you choose the structure tree - sections -right click - add new section - Combined U for the section, you can create it if you choose the method in the image. For the joint, you can see which control is insufficient in the design report. It is included in the formulas in the control where there is deficiency. Here you can decide which parameter you need to intervene.

 

[gunay.17]

Thank you Nurgül Hanım changed the anchor type and the deficiency was corrected.

 

[gunay.17]

Scissor top header joint detail is insufficient. How can I solve this?

You do not have permission to view link Log in or register now.

[/url]

 

[Olcay AYDIN]

Thanks Ms. Nurgül, the inadequacy was fixed when I changed the anchor type.

I am also facing a similar problem. The thickness of the base plate is unreasonably excessive. I would appreciate it if you could share your solution... Good studies...

 

[nurgulkaya]

Hello there; Change the base plate material of the joint. If you have made a hinged connection, change the anchor number of the joint to be recessed, analyze the project and see the results of the joint again. Good work.