German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish mühendis55
New Member
What is the reason for the error in the report
![img ]](https://i.hizliresim.com/r3oVlP.png[/img ])
You do not have permission to view link
Log in or register now.
]
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
md max-16999999999999999999999999999999 writes in the report
- Thread starter mühendis55
- Start date
Levent Özpak
Active Member
Hello, Review your project according to the information given in the link below on the subject. If the problem is not fixed, attach the project file.
You do not have permission to view link
Log in or register now.
Good workmühendis55
New Member
I have another question, Mr. Levent. columns are reinforced on different floors. For example, on the first 2 floors, 8Q14 IS ON OTHER FLOORS WITH REINFORCEMENT, 12Q14 and even 8 pieces of reinforcement jumped up to 44 pieces on the ground floor. When we reduce the reinforcement, I encounter the m(-as) error in the column. However, when I copy the column of an upper floor, it is not a problem. Can I have your valuable opinion on this issue?
Levent Özpak
Active Member
You can review the forum pages below with the increase in reinforcement on the upper floor of the column."muhendis55":1byo8qsp" said:I have another question, Mr. Levent. columns are equipped on different floors, for example, on the first 2 floors, 8Q14 IN OTHER FLOORS WITH REINFORCEMENTS 12Q14 or even 8 pieces of reinforcement on the ground floor, up to 44 pieces. when we reduce the reinforcement, in the column I am encountering the m(-as) error. However, when I copy the column of an upper floor, there is no problem. Can I get your valuable opinion on this issue
You do not have permission to view link
Log in or register now.