Insufficient slab thickness error

M

mbmb

New Member
I am trying to make a reinforced concrete project in idecad 7 for the first time. Even though I increased the slab thicknesses, I still get the same error: 'slab thickness is insufficient'. I wonder how can I solve this problem. I would be very grateful if you could help me urgently as I have a final homework assignment. Thank you in advance. Project Link : http://s3.dosya.tc/server2/t0u9yu/MBUDAKER.rar.html
 
Re: INSUFFICIENT FLOOR THICKNESS ERROR URGENT !!! Hello, First of all, there are beam slab edge overlaps and overlapping objects in your project. It is given as an error in the geometry control. (Slab edges should only be drawn on the empty edges.) In the Slab Thickness Control Reports, information is given about the working style of the relevant slab and the required thickness value. Good work
 
Thank you very much for getting back to my question. But it will be a hassle for you, I have a few more questions. How can I solve the problems you mentioned? For example, how can I detect overlapping objects? I am just learning Idecad 7. Therefore, I would be very pleased if you would explain the solutions you would recommend more clearly.
 
"mbmb":1abu321h" said:
Thank you very much for getting back to my question. But I have a few more questions to trouble you. I wonder how can I solve these problems you mentioned. For example, how can I understand overlapping objects. I'm just new to Idecad 7 Therefore, I would be very grateful if you could explain the solutions you would recommend more clearly.
Click to expand...
Click on the Geometry control line from the Tools menu and have it checked according to the current Settings. A dialog where errors are detected will appear. Click the error line you want to examine in the dialog and select the object. Click the select icon. The relevant object/objects will be selected in the plan window. To minimize errors in data entry, I recommend watching the training videos.
You do not have permission to view link Log in or register now.
 
hello, I have the same problem (I'm only asking for 4th basement floor) no matter how much I increase the thickness of my two selected balcony floors (for example, the normal room floor is 15 cm, because it gives an error) I went up to 21cm for the balcony) I get the same error.
 
"sefaaydin":3yx0dl9l" said:
hi, I have the same problem (I'm only asking for 4th basement) no matter how much I increase the thickness of my two selected balcony floors. (For example, the normal room floor is 15cm, I went up to 21cm for the balcony because it gave an error) I get the same error. If you don't mind, can you check.
Click to expand...
Hello, what the floor thickness should be is printed in the floor thickness control report. Also; Detected beam slab edge conflicts and overlapping object errors should be corrected. (Only empty edges are drawn on the slab edges.) - Upper rigid basement floor number -5 must be entered. - Bearing system behavior coefficient 7 must be entered. It would be appropriate to give different names to the parts between -K6 (same situation applies for K13-K14-K15 beams) Good work
 
Thank you very much for your tireless replies. especially - I always have doubts about the reinforcement calculation axes I make on raft foundation and floor floors - I don't want to solve S001 and S002 balcony floors as 17 cm. When all floors are 12-13 cm, is there a way to solve the balconies I mentioned as 12-13 cm as I am a new user? your suggestions will be very helpful.
 
You must log in or register to reply here.
Back
Top