ideCAD hall macro command help

[mustafa_]

I have such a design. I need to add columns to coincide with the joints of the beams, but I can't. And I want to pass beams from the level of those columns, that is, from the ridge, but I can't. I wanted to use ipe330 in columns and beams in my design, but I could use ipe300 because it was not in the program. How can I make these additions that I want to do?

 

[oguzcan]

Hello, the roof can be inclined by defining 2 side-by-side halls in the Hall macro and clicking on the flat roof option. Another solution is to explode the hall macro and convert the system to its normal state and define a column to the desired area with the steel column command. At the same time, the hall macro needs to be exploded in order to do things that cannot be defined in the macro, such as adding new elements to be defined in their combinations. To explode the hall macro; click on the hall macro - in the menu, under the steel section, click the 'smash object' command in the 'modify' section (or type 'x' in the command line and press enter). The section library contains all the sections in the arcellor mittal profile table. You can call the desired section from the library when you open the properties menu of the relevant element and click the 'load section' command in the section selected tab.