I got an issue with a concrete vault

A

ammer

New Member
dear Mr. Hakan and all members;
the below attaches for the concrete vault"tnoze",even after the addition of the vault, the axial loads for columns did not increase.
please solve this issue and get me your tips.
with my great respects..
You do not have permission to view link Log in or register now.
You do not have permission to view link Log in or register now.
 
ammer":1prx03oo said:
dear Mr. Hakan and all members;
the below attaches for the concrete vault"tnoze",even after the addition of the vault, the axial loads for columns did not increase.
please solve this issue and get me your tips.
with my great respects..
Click to expand...

Hi ammer,

You should set vault edges for building-vault together analysis. To do that, click vault on toolbar and click "set vault restraints". Click vault edges, choose "boundary conditions for solution with building system" and set restraints. See the picture below



Do the same for opposite edge.

now, go Analysis Settings, click "semi diaphragms" on General Tab and close dialog.



After analysis , you are going to see analysis results as you expect..
 
ammer":2z6shnwh said:
:o :o :o :o :o many thanks dear hakan,i have a version 8.503 english,dose it works?
Click to expand...

I was thinking you are using 8.103 which it doesn't work. It works on 8.503 but 8.504 is our last version we released
 
You must log in or register to reply here.
Back
Top