How to create a gap in the threaded floor for the ladder

F

fibonacci

New Member
Hello, as a new user, I am posting my problems step by step to the forum. Please your support. I created a floor space for a staircase to be used as an exit from the basement to the ground floor, but the ribs of the ribbed floor did not disappear after I created the floor space. The project is attached. How can I destroy the ribs? I would be very grateful if you could help. Thanks in advance,
 
Re: RIGHT TO CREATE A SPACE IN GEAR FLOOR FOR STAIRS. Hello, We do not recommend making such large spaces with the floor space command. Set gap boundaries with the tile edge and create your tile in this way.
 
Re: THE RIGHT TO CREATE A SPACE ON GEAR FLOORING FOR STAIRS. Mr. Berat, I did it as you said, I hope I understood it right. I re-added the project. Could you please check it out. I wanted to make sure. Thanks,
 
Re: THE RIGHT TO CREATE A SPACE ON GEAR FLOOR FOR STAIRS.
"fibonacci":2u0qbkx4" said:
Berat Bey, I did it as you said, I hope I understood correctly. I added the project again. Thanks,
Click to expand...
You got it right by drawing the border with the tile edge.
 
Hello Mr. Berat, according to the attached message, do we have to throw beams around the stairwell in ribbed flooring? If we need to throw beams there is a 25cm arm in the stairwell in my project. Should the beam go zig zag here or should it lie in a straight line? I will be very happy if you answer.
 
Hi, in ribbed floors, beams can be thrown according to the gap size. In stairwells, in my opinion, the beam must be discarded. In your project; You can solve it by throwing a beam in the form of a beam and a console floor for the arm.
 
You must log in or register to reply here.
Back
Top