gradual foundations

Re: STAGED FOUNDATIONS To create a foundation at a different level under the elevator shaft, create a space under the elevator perimeter curtains with the "floor gap" command after defining your raft floor. Then create a closed area with the edge of the raft slab on this place where you define a gap. Place a new raft floor in this enclosed space. Set the level by entering the raft flooring properties. Calculation axes and working distances of raft floors can be arranged as in the sample project.
 
Re: GRADUAL FOUNDATIONS Thank you, Mr. Levent, it was very nice to reinforce your clear explanation with an example, we hope you continue.
 
Re: GRADUAL FOUNDATIONS thank you levent sir; Here we connect the difference with the curtains and it remains empty at one end. but this is how you will connect the idle end to the normal foundation. This is required to be given as a drawing detail of the program. Not only the elevator shaft, but how do we solve the fundamentals that should continue at a different level after a certain distance. What kind of drawing detail will the program give it? When you say gradual foundation, you should be able to get a drawing with its details. It should give the transition detail in the area where the elevation difference is. I used to solve a single basic solution, give transition details where there is a level difference, and correct the height and stirrup drawings of the vertical carriers where there is a level difference, and this takes a lot of time. I wish you good work...
 
Re: STAGED FOUNDATIONS 1- The reinforcements of the raft are not visible between the bc axes in the example given, for example, for 55q12 given, this shows the distance of 5.5 meters, there is a gap in between, that is, the program where the BC AXLES did not put reinforcements here 2- in this application, the curtain raft joint is exactly Is it provided? Isn't there an idecad official who can explain how to make 3-stage raft flooring? It can also be with video. 4- or can you tell me if it can be done?
 
Re: GRADUATE FOUNDATIONS
"musamusa":3s5m226y" said:
1-in the example given, the reinforcements of the raft are not visible between the bc axes, for example, 55q12 is given for the top of the raft, this shows the distance of 5.5 meters. the program that has not been fired 2- is the curtain raft combination fully provided in this application? Is there not an idecad official who can explain how to install 3-stage raft? It can also be with a video. 4- or can you tell whether it can be done?
Click to expand...
Hello He defined the floor axes by drawing two calculation axes from the right, left / bottom and top of the elevator shaft in order to make the drawings smoother. In the current version, no details are given about the stage. 2- In the elevator shaft project, the panels transfer their loads to the raft in the elevator pit. 3- It can be examined from a 3D frame. You can define staggered raft systems. Create the boundaries of rafts with tile edges, Raft tiles Define ri and jeans. In the Analysis Settings / Foundation Tab, check the Consider soil structure interaction option. You can interactively solve neighboring rafts using the same tile edge as the border.
 
Re: GRADUAL BASICS ide demo did not open in 6.0051, is the problem with my program, or was it prepared in a version higher than 6.0051, my respects Mr. Yasin
 
Re: GRADUAL FOUNDATIONS The latest version is 6.0053. If you are using a firewall, give the program internet access, it will notify you of new updates.
 
Re: GRADUATE FOUNDATIONS mine is of course demo 6.0051 if you register in lower version, can you send the file you sent or in a way that I can open it, thank you
 
Re: GRADUATE FOUNDATIONS
"musamusa":3j2r7f6b" said:
ide demo did not open in 6.0051, is the problem with my program or is it prepared in a version higher than 6.0051, my best regards, Mr. Yasin
Click to expand...
Musa hello The project was prepared in version 6.0053. I recommend you to download this version Demo.
 
Re: GRADUAL BASICS thanks I downloaded 6.0053 and reviewed the project. here, I saw that the small piece between the (h-ı) and (gc) axes of the l-shaped one of the stepped raft foundations is not equipped. Should we define the calculation axis for that region? also, will the detailing of the level in the basic application be in future versions? Or is this issue being worked on? thank you
 
Re: GRADUAL FOUNDATIONS Dear ideYAPI officials, I don't understand why you give so much technical support to non-user forum members like "musamusa". The guy is obviously using a broken program. I think other members of the forum should give him technical support if they want. No, when will he get it? , will it happen ? . What's wrong with you man? Become a user once, then ask for an account, or whatever you want.
 
Re: GRADUATE FUNDAMENTALS 1-cassabotanik friend, I don't use 1 broken program 2- are you an idecad official, what's wrong with you? Whether idecad officials respond or not, we have the power to buy the original program worth 3-5-6 billion, thank goodness 4-I would like to be in contact with Mr. Hakan and Ms. Ayşe or other idecad officials 5-I am not visiting this page to read your messages 6- idecad officials Even if they don't want to answer, I respect it. It's not important, thank you for helping so far.
 
Re: GRADUAL FOUNDATIONS Friends, this is a scientific forum. Do your speeches here befit any scientist? You should set an example as intellectuals. Please stay away from such conversations. Share information here!!! The more questions you ask, the more precise information you will get. Please, I think it does not matter whether you are a user or not. The important thing is the knowledge we have gained.
 
Re: GRADUAL FOUNDATIONS friends, what Engineerkutlu said is very true, leave these kinds of discussions and styles. This is a scientific forum not a coffee shop. We will say our wishes. We will ask our questions. Sometimes we will get our answers from authorized friends, sometimes from other users. Please don't squat. I love my forum, I look at it all day, I exchange information, let everyone do the same job. Do not interfere with people's rights.
 
Re: GRADUAL FOUNDATIONS Mr. Musa, drawings of gradual foundations are not in the program for now. We'll add it in the future, but it's not our top priority right now.
 
Re: GRADUAL BASICS In the ideCAD forum, the questions of anyone who wants to learn the program, whether they are ideCAD users or not, are answered by both the ideYAPI team and our valuable users. Our forum is a space for knowledge sharing, and with everyone's positive participation, it fills a gap we've been missing for a long time. We try to answer the questions posed in the forum as soon as possible, but our first priority is to quickly help our users to solve the questions and problems they pose to the technical service by phone and e-mail, and then to find solutions to the problems and questions that our users encounter in their projects in this forum. Then the questions of the other participants are answered. The forum program is not a platform where you can learn from scratch through question and answer. For this purpose, our Turkish user books, audio training videos, demos and one-to-one book content in pdf format in the demos and "What is this?" We have help. Mr. The reason why Musamusa Hakan invited you to the training is not because we are bored with your questions or because we want to answer them, but to inform you that you need one-on-one training from the questions you ask and that you can get free support from ideYAPI. In addition, asking the information you can get from the user book, regulation or training in dozens of articles here reduces the usefulness of the forum, our only concern has been in this direction, otherwise no one can tell you not to write to the forum. Thanks to all forum members for their valuable participation.
 
Re: GRADUATE FOUNDATIONS ideYAPI ; extraordinarily tolerant, democratic and sharing. Congratulations to them. But I think there should be a separate section in this forum where only users of the program can ask questions. Then Mr. "Musamusa" also enters and asks questions from the special section of the users. Of course, while there is free program training, trying to learn the program from the forum must be a separate virtue. I got the following paragraph from ideYAPI's site. All ideCAD users have the right to receive free and unlimited technical support from ideYAPI technical services via telephone, fax and e-mail for 1 year from the date of purchase of the program. Users also benefit from periodically repeated training seminars free of charge. Seminars are held at ideYAPI, Istanbul and Bursa offices and authorized dealer offices. Click on the Training Seminars link on the left for seminar dates and contents. For users who want to study in their own offices; The hourly fee for this service is 90 YTL + VAT. If this request will be in a different location than the cities where ideYAPI or authorized dealers are located, transportation and accommodation costs will be added. Participation in training seminars held at ideYAPI offices is free of charge. Program users, any questions, requests, They can post their likes and complaints on the user forum. It is not necessary to have purchased the program to become a member of the forum.
 
You must log in or register to reply here.
Back
Top