Hello, Problems have been fixed in the attached project. You can continue your homework with this project if necessary by comparing it with your own project. 1) I did not change the positions of the columns, but I rotated some columns. It is difficult to recover the weak column and column-beam cutting security without performing rotation If it is possible for these errors to remain in your homework, you can restore them. 2) To ensure beam torsion problem and column-beam beam shear safety, the concrete class was changed to C25 instead of C20. 3) Beam dimensions were made the same 4) Floor thicknesses for floor thickness controls 5) Single foundations were made symmetrical. Dimensions have been adjusted to ensure that it fits. The thickness was too much, it was reduced."umutnazife3361":2sw9i4uf" said:Hi guys, I'm solving a reinforced concrete project for the first time. I want to apply the project I made by hand in idecad. Could you review the project I will give below? I want to know where I went wrong. Thank you Features There is a problem with beams and flooring! it will be solved without changing the positions of the columns
German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish