3d image problem in ideCAD 8

O

omerfarukoncel

New Member
While making steel modeling, the model disappears when you switch to the 3D screen. When you click, it comes back, when you stop clicking, the model disappears. Is this a limitation because it's a demo?
 
Re: 3d display problem in IdeCAD 8!! There are no restrictions on the demo in the program. It's an issue with your video card driver. If you are using a notebook, either your graphics card is insufficient, or the default graphics processor for the program may be the integrated graphics processor. Otherwise, it's not about the demo.
 
Re: 3d display problem in IdeCAD 8!! Hello; Having it in a single project could be because your project is quite loaded. But we need your project to be able to say something clear. For the settings related to the video card, the section written in the image must be active. In laptops, the card with high performance should be selected. Good work.
 
Hello Nurgül, I would like to share something about the image problem. I am using desktop PC and video card is nvidia 1050 TI 4GB. The graphics card is quite adequate. Antialiasing is sometimes disabled in the 3D window (especially after moving the separator between the plan window and the 3D window) and a jagged image occurs. It fixes itself when I make the 3D window full screen. I introduced the .exe file of ideCAD in the driver settings and set it to maximum performance, but nothing improved. Do you have any information on this subject?
You do not have permission to view link Log in or register now.
You do not have permission to view link Log in or register now.
 
"MaFiAMaX":2cjk2mvb" said:
Hello Ms. Nurgül, I also want to share something about the display problem. I use a desktop PC and the video card is nvidia 1050 TI 4GB. The video card is quite sufficient. Antialiasing is disabled and jagged image occurs. It gets fixed when I make the 3D window full screen. I introduced the ideCAD in .exe file in the driver settings and set it to maximum performance, but nothing fixed. Do you know about this?[ /quote] Hello Mr. Erhan, We will notify ARGE to investigate the issue. Thank you, good work
Click to expand...
 
You must log in or register to reply here.
Back
Top