Win 7 Ide Static Error

[evrenkent]

error text:

Issue signature: Problem Event Name: APPCRASH Application Name: ideCAD_Statik_7.exe Application Version: 0.7.0.15 Application Timestamp: 4f105c68 Error Module Name: ntdll.dll Error Module Version: 6.1.7600.16385 Error Module Timestamp: 4a5bdb3b Exception Code: c015000f Exception Distance: 00084401 OS Version: 6.1.7600.2.0.0.256.1 Local ID: 1055 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Read our additional Information 419288b3a9e3Ad Online Privacy Notice 4192883b3954 http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x041f If there is no online privacy statement, please read our offline privacy statement: C:\Windows\system32\en-GB\erofflps.txt

on Windows 7 computer We get this error on all 32 and 64 bit versions. It seems that the files will open, but eventually it crashes and closes. So what's the source of the problem?

 

[HakanŞahin]

Try to run the program by holding down the Ctrl+shift key... (a message should appear saying the settings were reset before the program opens) If the problem is not resolved, contact us on 0 224 220 67 17.. Let's look at the problem with remote access...

 

[evrenkent]

ctrl+shift, running as administrator, compatibility mode etc. Everything has been tried and the problem persists. Also, when running with ctrl+shift, the settings reset message did not appear.

 

[HakanŞahin]

When operating with ctrl+shift, the settings reset message did not appear.

Then you couldn't do the operation. Ctrl+shift must be pressed until the message comes. .

 

[cassabotanic]

Tried everything like ctrl+shift, running as administrator, compatibility mode etc. The problem persists. Also, when running with ctrl+shift, the settings reset message did not appear.

There are Shift keys on the top of it. Do the same steps 1) Press the Ctrl key with the thumb of your left hand 2) Press and hold the thumb of your left hand until it says release 3) Press the index finger of your left hand, press the Shift key 5) Keep the index finger of your left hand pressed until it says release 6) Run the ideCAD Program 7) Wait until the settings reset message appears 8) Let go of the thumb and index finger of your left hand.

 

[Tuğrul SADIKLAR]

Good evening. Problem signature: Problem Event Name: APPCRASH Application Name: ideCAD_Statik_7_x64.exe Application Version: 0.7.0.20 Application Timestamp: 51dd4ce6 Error Module Name: ideCAD_Static_7_x64.exe Error Module Version: 0.7.0.20 Error Module Timestamp: 51dd4ce0005 Exception Code: Exception Distance: 000000000040ed9c OS Version: 6.1.7600.2.0.0.256.1 Local ID: 1055 Additional Information 1: 3cc0 Additional Information 2: 3cc060a178a64c91235a2e74a817533e Additional Information 3: 9ad5 Additional Information 4: I'm grappling with 9ad54db97a570f6a74ad917e15bac6 I've tried disabling OpenGL with no results. I wonder what is the source of this error, video card RAM etc. ?

 

[HakanŞahin]

Good evening. I'm struggling with an error, I tried Ctrl+Shift program startup and disabling OpenGL with no results. What is the source of this error, video card RAM etc. ?[/quote ] You did not write at what stage the problem occurred. Is it while opening the program, opening the file or during the analysis? If it happens while opening the project or during the analysis, add the project. Otherwise, call us, connect to your computer with remote access and look at the problem together. Tel : 0 224 220 67 17

 

[Tuğrul SADIKLAR]

Sorry, I forgot that part. The problem occurs when I try to reopen the previously analyzed and closed project and make data changes (for example, rearrangement of panel horizontal load, distributed or single load parameters) or when I try to scroll the screen (pan). what is the reason? And does this lead to analytical errors?

 

[Levent Özpak]

Excuse me I forgot that part. The problem is when I try to reopen the previously analyzed and closed project and make data changes (for example, rearrangement of panel horizontal load, distributed or single load parameters) or when I try to pan the screen.

Can you add the problematic project?

Let me ask it out of my mind, what is the reason for "creation of automatic analysis system" is disabled by itself? and does this cause errors in analytical sense?

Automatic analysis system project density increases, it is disabled so that the work performance in the project does not decrease.Does not affect the solution.(The system is already created automatically when the analysis is done.)

 

[HakanŞahin]

Excuse me I forgot that part. The problem is when I try to reopen the previously analyzed and closed project and make data changes (for example, rearrangement of panel horizontal load, distributed or single load parameters) or when I try to pan the screen.

Could you update the graphics card software and try again?

 

[Tuğrul SADIKLAR]

I updated the video card driver, the problem seems to be fixed, I hope the same problem will not happen after that. If I encounter the same problem, I will share it here again, thank you, good work.