We can't print the project

A

akif tekin

New Member
hello, we took the output of two different projects that we drew at the same time with ide static, but we can't get the output of the other one.. the project looks normal in the preview, but when we send it to the plotter, irrelevant things appear... what could be the reason? we are experiencing something like this for the first time... the picture of the output sample is attached.. regards
 
Re: We Can't Print Project... Hi, Do you see your drawing correctly when you click the "Preview and Print" button in Plotter Settings? If you don't see it, there may be a problem with pen thicknesses and drawing area. If you are seeing the plot correctly, the plotter may be running out of memory.
 
Re: We Can't Print Project... When I first clicked on the image, the image was broken, then I turned off the computer and the plotter and turned it back on. The image was corrected but the output did not improve... Is the plotter memory insufficient only in this project? he didn't do that..i don't think the problem is with the plotter..
 
Re: We Can't Print Project... If you think there is a problem with the project, please add it to the forum. Let's examine.
 
Re: We Can't Print Out the Project... We can print out the drawing from Laserjet in our office without any problem. There is no problem arising from the project.
 
Re: We Can't Get the Output of the Project... Thank you for your interest, but I don't have any problems with any other project, but why am I living in this project, I can't figure it out? I don't know what to do...
 
Re: We Can't Print Project... I suggest you review the printer settings and driver. Also try sending your drawing piece by piece to the printer.
 
Re: We Can't Get the Output of the Project... Could this preview have something to do with the plotter? When I close the project and open it, the preview is corrected and I send it to the plotter..then the projection gets corrupted again...
 
Re: We Can't Print The Project... Have you tried to output the drawings piece by piece? (For example only mold plans) If you still have problems, contact us. Let's try to identify the problem.
 
Re: We Can't Print the Project... Good work. I have read your correspondence. We have a printing problem. The image on the screen does not output more than 310 mm, regardless of the size of the project. I would be glad if you help. Good work
 
Re: We Can't Print the Project...
"Zühal POLAT":1y2p4pfx" said:
Good work. I read your correspondence. We have a printing problem. The image on the screen does not output more than 310 mm, regardless of the size of the project. I will be glad if you can help. Good work
Click to expand...
Is there any problem with the preview?Have you selected the layout size suitable for the project layout from the printer settings?
 
You must log in or register to reply here.
Back
Top