German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Hello, in projects that are drawn in idearchitecture and transferred to idestatatic, does idestatatic automatically take the walls on the beam and floor as a load? Or is it necessary to select the linear load for the walls for flooring, and the load for beams according to the wall thickness from the properties? * I defined it on a 25 cm thick wall beam in idearchitecture, but I wish good work to everyone who has 12 cm of gas concrete in beam loads in idestatics.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Wall Loads
- Thread starter serdagi
- Start date
HakanŞahin
Administrator
In 7.022, you should check the "Get ideCAD Architectural Walls automatically" option in the Analysis Settings Other tab. In version 8, this option has been removed. If there is a wall object on the beam, the program automatically bases on the load of the wall object."serdagi":1nj4sm9x" said:Hello, in projects that are drawn in idearchitecture and transferred to idestatatic, does idestatatic automatically take the walls on the beams and slabs as load? In idearchitecture, I defined a wall with a thickness of 25 cm on a beam, but I wish good luck to everyone who has 12 cm of aerated concrete remaining in beam loads in idestatics
Dear HakanŞahin, thank you for the reply. What I understand from your answer is that even if we have given the wall load in the beam settings, if we draw a wall on the beam in architecture, the program detects it. Of course, when we select the correct wall load in the wall settings menu. I would like to ask one more thing, can't the load library option be added in idearchitecture like in idestatic?