German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Hello, TBDY 2018 brought a lot of control about tiles. This in-plane pull and slip control I encounter in most projects. ideCAD performs this control clearly and precisely, but the user needs to intervene for the additional reinforcement that needs to be placed. It is not a problem for one or two tiles, but when this problem occurs in dozens of tiles in a large project, it wastes a lot of time. Can't ideCAD define the required additional reinforcement itself?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tile Tensile, Shear Stress Control Problem
- Thread starter MaFiAMaX
- Start date
Levent Özpak
New Member
"MaFiAMaX":1r4uvqpq" said:Hi, TBDY 2018 brought a lot of control for tiles. I encounter this in-plane pull and slip control in most projects. ideCAD does this clearly, but for the additional reinforcement that needs to be put, the user has to control it. It's okay with one or two slabs, but when this problem occurs in dozens of slabs in large projects, it wastes a lot of time. Can't ideCAD define the required additional reinforcement itself?
Thank you Mr. Levent. Basically, just as the necessary additions are calculated and there is no problem with the section capacity, the necessary reinforcement is put in, and it can work similarly for flooring. Believe me, this was the issue we had the most trouble with with the last update. I am currently having this issue with over 50 tiles. I wish you good work.