The texts are intertwined when retrieving the drawings

V

Veysel YILMAZ

New Member
After the project is completed, the basic application plan - formwork application plan - foundation expansion - beam expansion etc. When drawing such drawings, the texts are always intertwined and the master in construction has difficulty reading these texts. For this reason, I fix these mixed and nested texts myself with object blasting, so it takes a long time. Does anyone experience this situation or can a brother who knows the solution help me?
 
Re: PROJECT APPLICATIONS AND INSTRUCTIONS ON THE DRAWINGS If all your drawings have such a response, you may have arranged the font sizes larger than the default values. If you attach the project file, we will review it. Good work
 
Re: PROJECT APPLICATIONS AND INSTRUCTIONS ON THE DRAWINGS
"Veysel YILMAZ":247kj9rw" said:
the basic application plan - mold application plan - foundation opening - beam expansion etc. it gets in and the master in construction has a hard time reading these articles. For this reason, I fix these confused and intertwined texts myself with object blasting, so it takes a long time. Does anyone experience this situation or can a brother who knows the solution help? Since the floor areas are small in the pattern plan picture you added, it seems normal to write the text in this way. In such cases, you can select and move the texts with the "Quick Move" command without exploding the objects. In your first message, you wrote that the texts of all the drawings are nested inside. If you add your project file, you can check the status in other drawings. we can.
Click to expand...
 
Re: ARTICLES ON THE PROJECT APPLICATIONS AND DRAWINGS
"Levent Özpak":tz7fo9wa" said:
"Veysel YILMAZ":tz7fo9wa" said:
I cannot send it because the file size is large, if you give me your e-mail address, I will send it[/ quote]
You do not have permission to view link Log in or register now.
etc. You can upload it to a site and give its link.
Click to expand...
You do not have permission to view link Log in or register now.
Click to expand...
 
In the project you added, there is no confusion in the texts in the drawings in general. For situations that occur due to the small size of the objects, as I mentioned in my previous message, you can edit the objects without exploding with the "Move Fast" command. Good work
 
"Levent Özpak":1ivposo7" said:
In the project you added, there is no confusion in the texts in the drawings in general. As I mentioned in my previous message, for situations caused by small object sizes, you can edit the objects without exploding them with the "Quick Move" command. Good work
Click to expand...
it doesn't give any trouble here, it gives trouble in the reinforcement plan in general
 
"Veysel YILMAZ":yctsjp16" said:
doesn't bother here anyway, it causes trouble in the reinforcement plan in general
Click to expand...
- In such cases "Move Fast"[ You can select and move texts with the /i] command.
 
"Levent Özpak":25huykjn" said:
"Veysel YILMAZ":25huykjn" said:
doesn't give any trouble here, it causes trouble in the reinforcement plan in general
Click to expand...
- In such cases, the texts with the "Move Fast" command without exploding the objects You can select and move. Good work
Click to expand...
thank you for your time and attention, good work to you too
 
You must log in or register to reply here.
Back
Top