Subaman shortage

[ssesli]

As you can see in my attached project, I have defined the basement curtain. However, in the vertical expansions of the column, the sub-basement curtain is not visible and the column sprout lengths are short from the foundation. Also, I would appreciate it if you would review the project and share your thoughts. Best regards,

 

[Levent Özpak]

As you can see in my attached project, I made a definition of a basement wall. However, in the vertical expansion of the column, the basement curtain is not visible and the column sprout lengths are short from the foundation. Also, I would appreciate it if you could examine the project and share your thoughts. Best Regards,

Hello , The length of the column shoots coming out of the foundation is drawn based on the upper level of the foundation (If you want, you can enter a min. L length for the column/wall anchor reinforcement length in the General Reinforced Concrete parameters and use the anchor drawn here for the vertical expansion of the column.) In your project, the slab edge is drawn under the KZ10 and KZ17 beams. .(Given as a warning in geometry control) Good work

 

[ssesli]

I do have one more question. Would it be more logical to define the 50cm flooding as a separate floor? Or should I do as you say and draw the sub-basement by hand only in the vertical expansion of the column? Thanks for the replies.

 

[Levent Özpak]

I have another old question. Would it be more logical to define 50cm of flooding as a separate floor? Or should I do as you say and draw the subbasement by hand only in the vertical expansion of the column? Thanks for the answers.[/quote ] You can define basement curtains as in your project

You do not have permission to view link Log in or register now.

 

[ssesli]

As I mentioned, then, in the vertical expansions of the columns, the basement curtains are not visible. Should this be fixed manually?

 

[Levent Özpak]

As I mentioned, then, in the vertical expansions of the columns, the basement curtains are not visible. Should this be fixed manually?

Basin curtains are visible in the curtain details. Here, you can make the adjustments about the anchorage length manually.

 

[HakanŞahin]

The vertical expansion of the column is given, considering that the sub-basement panels and columns will be neglected together. When the production is done in this way, the expansions given by the program are appropriate.