German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish Dear Sir/Madam, I want to retrofit in the attached project, but during the analysis, there was a strangeness in the columns and loads, and I could not find what happened. It seems that not all columns are saving again, when I want to look at the section effects on the columns, there are strange numbers.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
strange numbers in column and column section effects
- Thread starter suatyy
- Start date
Levent Özpak
New Member
Suat Bey hello, The problem in your project is due to the slant angle of the DB76 slab on the ground floor being 90 degrees. The DB76 slab is a slab at level -1, but no beam is defined for the left edge of this slab. To solve your problem, define the beam at level -1. In the slab settings, set the floor level to -1 m. and place it indoors."suatyy":2ul58yg0" said:Mr. Authorized I want to strengthen in the attached project, but during the analysis, I couldn't find out what was wrong with the columns and loads. Not all columns seem to be helping. Again, when I want to look at the cross-section effects on the columns, there are strange numbers.
I have a similar situation. I couldn't figure it out. I have attached the file, I would be glad if you can help. That's why I want to say the following. 1. Analysis time is longer than before, for example, even a floor slab analysis takes a long time, and for example, I double-click on any tile, if there is something I want to change, I change it or I do not change it, I click it, I move the mouse over the toolbars, I wait for a certain time, then the mouse cursor returns to its normal state. Even though my computer is a good computer, the program is working by itself, I was working much faster in 5 versions on the same computer, working on the perspective screen is much faster than before, in general, it would be great if such an acceleration could be made. 2. Right-click "what is this" help does not work everywhere, and there is no help about new features in working places. I want an improved version of this help window to be added as soon as possible. I know that geometry control will be back in a more comprehensive way, I just want to say that I am missing it. Good work...
HakanŞahin
Administrator
Hello There are 400 tf/m entered values for beam wall loads. /m". Choose beams K9-K10-K14-K15-K16-K17-K27-K36 on both ground and first floors. Make user defined wall loads 0,400 tf/m. Good work"enginuy":3huldn21" said:I have a similar situation. I couldn't solve it somehow. I attached the file, I would be glad if you could help me....
HakanŞahin
Administrator
Hello again, Your project has circular polygon columns and the number of points is 40. This value is too large for these elements. As I see it, this is the reason for the slowness of your project. But to fix it, you cannot select the columns and change the number of points. Delete and re-enter Set column before creating polygon column If you set the number of dots to a value such as the default 20-25, your work will accelerate."enginuy":k4jiylyz" said:1. The analysis time is longer than before, for example, even a floor tile analysis takes a long time, and for example, I double-click on any tile, if there is anything I want to change, I change it or I do not change it all, I click the mouse over the toolbars, it is clear I wait for a while, then the mouse cursor becomes normal, although my computer is a good computer, the program works by tightening itself, I was working much faster in 5 versions, on the same computer, working on the perspective screen is much faster than before, in general, such an acceleration is possible. It would be great if you have it.
"Levent Özpak":m0p99ouq" said:I fixed the beams in the project, the concrete-slab moments were calculated when we clicked, but I can't see the slab moment values in color in the 3D frame."suatyy":m0p99ouq" said:Mr. Authorized I want to strengthen the attached project, but during the analysis, there was something strange in the columns and loads, I couldn't find what happened. Not all columns seem to be saving. Again, there are strange numbers when I want to look at the cross-section effects on the columns. The DB76 slab is a slab at level -1 but no beam is defined for the left edge of this slab. To solve your problem, define the beam at -1 level. In flooring settings, change the floor level to -1 m.
Levent Özpak
New Member
When the project is analyzed, slab moments are seen in 3dframe mode in the perspective window."sereze":2mdbad49" said:I fixed the beams in the project, the moments were calculated when we clicked on the reinforced concrete-slab, but I can't see the slab moment values in color in the 3D frame.
Yes, I only did a floor analysis, when the whole building was analyzed, the situation improved. Thanks."Levent Özpak":s84cv3x1" said:Analysis in the project When done, tiling moments appear in 3dframe mode in the perspective window."sereze":s84cv3x1" said:I fixed the beams in the project, the concrete-slab moments were calculated when we clicked, but I cannot see the slab moment values in color in the 3D frame.