Strange bugs in Geometry Control

suatyy

New Member
Hello, Mr. Hakan, There are some points in the plasform project that I could not add here because it is larger than 2 mb and that I sent you by e-mail, which did not appear when receiving a report, but were given as errors in the geometry control. The beam KB11, located between the elevator curtains, is called unsupported. I couldn't get rid of this error in geometry control even though I placed it over and over again. Similarly, in elevator curtain elements entered as panel element, it tries to control l/b>7 in the curtain definition and gives an error. Again, when I get the beam details of this project and change the font size of the beam detail, I see that this font size change is not made in the additional support reinforcements. The second project in the appendix is an industrial structure. I added the loads coming from the steel shears as point load G, but at one point in the data, there are more than one load that I did not enter. Are these point loads taken into account in the earthquake calculation? By the way, one point I would like to ask is how do you paste pictures on this forum. It doesn't happen with copy paste. Suat Yildirim
 
Hello Mr. suat
"suatyy":1f3whq7i" said:
Hello Mr.Hakan, it is said that the KB11 beam between the elevator curtains is unsupported. I could not get rid of this error in the geometry control even though I placed it over and over again. Suat Yıldırım
Ignore this warning. Such a warning in the update It will not be given. [/quote] This warning is also for informational purposes only. We recommend entering the panel object only for curtain objects in the program. However, there is no harm in using it.
"suatyy":1f3whq7i" said:
Again when I get the beam details of this project, when I change the text size of the beam detail, I see that this font size change is not made in the additional support reinforcements.
I think you mentioned other floor reinforcement texts written on the addition. We may have fixed them. If necessary, it would be better if you could explain with a picture. It can be made parametric according to the need.
"suatyy":1f3whq7i" said:
I added the loads from the steel trusses of an industrial structure as point load G, but there are more than one load that I did not enter at one point at the nodes in the data. . Are these point loads taken into account in the earthquake calculation?
I examined your project, there are really more than one point defined at the nodal point. We need to know how this happens. I was able to delete and redefine. When choosing the node points, it is necessary to select the relevant node. I guess other nodes may have been selected along with the relevant node. Node load affects in the corresponding direction. The nodal load you give for the G load is only effective in the G direction. If you want to include the loads you have entered into the system with the effect of earthquake, taking into account the storey weight, define "point load to the element". You can select the relevant element from the structure tree and add the point load with a right click
"suatyy":1f3whq7i" said:
By the way, one point I would like to ask is how do you paste the pictures in this forum. It is not possible with copy paste. Suat Yıldırım
Inline where you add There is a place command. After adding the pictures as attachments, you can click on the place inline and put the picture wherever you want. Good work
 
I wanted to add a detailed picture of the problem with the font size. There is an add file in the plugin section, I couldn't find add between lines. That's why I sent you an e-mail. Suat Yildirim
 
"suatyy":1tsm57ts" said:
I wanted to add a detailed picture of the problem with the font size. I couldn't find add a file between the lines in the attachment section. I sent you an e-mail because of this again. Suat Yıldırım
First of all, I wanted to add the image in paint program . Save as jpg. After uploading the jpg file with the file upload process, a command will appear as in the attached screenshot. Click on the Place in line icon on the relevant line...
 
Back
Top