Slab Cd error - Slab finite element information

A

ATK

New Member
Mr.s; In my attached project, I get a Çd error in the basement floor d32 slab and when I look at the "slab static and reinforced concrete reinforcement calculation" section from the reports, I see that there is something strange in the "medium Md" tab. Also, when I do a slab analysis, some parts of the finite element lines created by the program during the analysis are clean and clear as if I divided them with beams. I see that some parts of the net are included in the analysis as if they are a complete slab, outside the parts I have divided. Apart from that, what is the problem with the ground floor d20 slab? Thanks for your interest..
 
Hello, In the project, the meshes are not formed correctly in the floor analysis on the basement and normal floors. The lower slab edge of the D19 balcony slab on the 1st floor is not attached to the beam. If it is connected to the beam, the slab analysis is done correctly. Wipe D34-D37-D40 floors so that floor webs form correctly in basement 1. Define the skew of the K35 beam as 5 cm and place the slabs again. In the slab analysis, the meshes will be formed correctly. In addition, the 2nd account axis of the D14 floor, with its name on the basement floor, was operated as a console. The reinforcement axes of the slab can be arranged in the attached project as in the basement. Good work
 
Hello, I'm also getting the same Cd error. I couldn't fix it anyway. 1. basement d03 flooring is problematic. I'll be pleased if you pay attention.
 
"mertkaanari":2cgrsdwc" said:
Hi, I am also getting the same Cd error. I could not fix it. The 1st basement d03 slab is problematic. I would appreciate it if you are interested. joint point also formed in the different coordinate.If the slab edge and slab are redefined to connect to the beams, the problem is solved.Good work
Click to expand...
 
You must log in or register to reply here.
Back
Top