German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SAVE AS OLD VERSION
- Thread starter emrebagdu
- Start date
HakanŞahin
Administrator
Hello.. You cannot open version 6 projects in version 5... You can save the latest version projects of 6 according to versions 6.0012, 6.0055 and 6.0101, which are in version 6 family, and open them in all versions of 6.
HakanŞahin
Administrator
Hello,
Technically, new versions only read old versions, and the ability to read new versions in old versions is an extra feature. Due to the request, we added it in version 6. This process has been made available in the family of version 6. This feature is only available to us among domestic software."emrebagdu":1x0393wj" said:so why?
Please enter the projects that you will pushover with 5 next time. I wish you had asked us in the forum before entering the project.. Good work"emrebagdu":1x0393wj" said:6 I need to open the project I made in the enterprise version and perform pushover analysis. Should I re-enter the project from the beginning just for this? In 5 versions
Bolvadinim
New Member
This feature is definitely available in many professional programs. I don't see it necessary to give examples anyway."HakanŞahin":2w2muiw1" said:Technically, new versions only read old versions, and the ability to read new versions in old versions is a very extra feature.
Programs that you mean as domestic software will also add such features in IdeYAPI. The important thing is to respond to the needs and add innovations continuously. If the work we do stays where it is, then there is a mismatch. We are aware that the work you do is not easy, we appreciate the innovations that İdeYAPI offers us. Our hope is to be one of those who constantly add value and share value."HakanŞahin":2w2muiw1" said:We added the option to save according to the old version in version 6 due to the request from our users. This process has been made available in the 6 version family. Among domestic software, this feature is only available to us.
HakanŞahin
Administrator
Hello,
We already have this feature since version 6 ... If you want to give an example, our program"Bolvadinim":z13li1y8" said:This feature is definitely available in most of the professional programs. I don't see it necessary to give an example here, you already know.
To emphasize that this topic was already done in 6, it is a plus compared to 5 and other programs... Good studies"Bolvadinim":z13li1y8" said:Why do you compare yourself with the programs you mean as domestic software.
Bolvadinim
New Member
I wanted to ask while on the subject.. Why is Pushover analysis not included in version 6? It exists in the old version.. It does not exist in the new version.... We do not understand what the logic is. Is there a need? As you can see, the demands of the users are expressed here. We have been waiting for the pushover issue to be added since last year, but it does not. ?"HakanŞahin":3nyllovo" said:Next time, please enter the projects you will do pushover with 5. I wish you had asked us in the forum before entering the project..
cassabotanic
New Member
This feature already exists. When it comes to six versions, they do not take away the five versions. If you are going to pushover, you enter the data with five. Six versions are already reading this data. I think like this.
Bolvadinim
New Member
Dear cassabotanic We are preparing our architectural project with the new version 6, the design studies of the architectural project we have prepared are naturally working with the possibilities of the new version 6. The projects are ready for the static project after many changes and revisions, so the data in hand is ready for static analysis as the final version. We are aware that it takes time and effort to make all of these possibilities ready for 6 versions in the transition to version 6 with version 5. However, it takes time and effort to always go back to version 5 and pushover, or as Hakan says ""cassabotanic":2wduljtv" said:This feature already exists. When there are six versions, they do not take away the five versions. If you are going to pushover, you enter the data with five. Six versions are already reading this data. I think so.
is not very efficient to ask. Also, the user wants to pushover to every designed project. Why leave the new version and try again with the old version? If it's going to be like this; apparently so, then continue with version 5..Hakan Şahin wrote: Next time you will push your projects, please 5 Enter with . I wish you had asked us in the forum before entering the project..
HakanŞahin
Administrator
Dear Users, At the stage of developing a business, you will appreciate that you have to consider the time-efficiency performance of that work and its contribution to the user. This is the case for any business. From this point of view, ideYAPI needs to develop projects that are in line with the targets and will provide efficiency in use. This is what is best for you, our users: It is aimed to develop the program in the most efficient way in a short time. Whether to make 6 versions of the subject pushover analysis: When you examine the earthquake code, you will see that the use conditions of pushover analysis and linear performance analysis are kept the same. In other words, for the projects to be retrofitted, linear performance analysis was deemed sufficient to fulfill the regulations. No distinction is made between linear performance and pushover analysis in terms of building type and conditions of use. He thought it was more efficient. The work list is already clear. We see that pushover analysis is requested from time to time. I am in the wing that this is mostly requested for academic studies. Because, as I wrote above, it is sufficient as a regulation to prepare a linear performance analysis report in retrofit projects to be implemented. For other cases, pushover analysis in 5 versions is quite useful. We all know that this opportunity is in our hands. Finally; I would like to remind you again and again that we consider your requests and suggestions within the plan and program. The order of the work, the time to be done, whether it will be done or not, are best evaluated in terms of time - efficiency performance. Thanks for your attention...
ideCAD v5 During the transition from 'to v6', we did not try to change the version by adding extra features on top of the existing structure, as is usually done in the software development process, we completely reconsidered the analysis infrastructure of the program from scratch.The most important reason for this is a new analysis that can be developed in the future and can meet more complex needs. module, which we experienced when the heat calculation and phased construction analysis were added to the program in a few months and presented to you with an update.In this process, there was no such thing as specifically removing the pushover analysis from the program, a new pushover analysis had to be prepared for the new analysis infrastructure. Especially in order to respond to your more urgent requests (eg colon appl ication and vertical expansions) and we postponed it because there was not much demand. That's why it's in version 5 and not version 6."Bolvadinim":1caowiro" said:While we're on the subject, I wanted to ask.. Why isn't Pushover analysis included in version 6? It's in the old version.... It's not in the new version.... We don't understand the logic