Risky building detection and 3d linear load display

[haakn]

1. In the 7.020 version, it analyzes the risky building by directly considering the effects of the filled walls. but it should be taken into account in new versions depending on some conditions whether it will be taken into account in the regulation 2. Making the linear loads effected on the floors can be displayed by giving different colors in 3d like the walls in the analysis results. Sent from my SM-G935F using Tapatalk

 

[Levent Özpak]

1.It analyzes the effects of hail walls directly in the 7 .020 version for risky building detection. At this stage, you can manually calculate the infill wall areas and enter them manually in the Analysis/Floor Parameters/Irregularities tab from the Aky and Aky columns

2. Making the linear loads acting on the floors can be displayed by giving different colors in 3d like the walls in the analysis results.

According to the semi-rigid diaphragm method, the linear and point floor loads are shown in the analysis model. Good work

 

[haakn]

1. In the 7.020 version, it analyzes the risky building by directly considering the effects of the filled walls. but it will be taken into account in new versions depending on some conditions whether it will be taken into account in the regulation

Hello, -It is among our request notes for the automatic calculation of the infill wall effect according to the principles specified in the RBT Regulation. At this stage, you can calculate the infill wall areas manually and enter them manually from the Aky and Aky columns in the Analysis / Floor Parameters / Irregularities tab.

2. Making the linear loads acting on the floors can be shown in 3d by giving different colors like the walls in the analysis results.

Linear floor loads are shown in the analysis model in the solution according to the semi-rigid diaphragm method. Good work [/ I mean it can be displayed as quote]3d and can be printed Sent from my SM-G935F using Tapatalk