report problem

G

GETA

New Member
Although there is no problem in the program in Idestatic-5, when the report option is clicked after the analysis, the report pages are blank.
 
"GETA":3b6yxn1i" said:
Although there is no problem in the program in Idestatic-5, when the report option is clicked after the analysis, the report pages are blank. I would like your help to solve the problem
Click to expand...
The sign of the index column in the Analysis menu/Floor parameters It may be removed, Printer settings A4 form paper may not be selected. If the problem is not resolved, add your project
 
Mr. Levent, although the settings you mentioned were made correctly, the problem persists. I am attaching the project.
 
Hello, "Only take active floor" option is selected in the optional report... In this case, you need to switch to any floor and get a report while there (not in the drawing window) or select the "Report entire project" option and then get a report. Good work
 
Mr. Hakan, nothing changes, and we can get reports from the floor we want, we do not have to take reports from all floors.
 
All right.. If you are going to buy for any floor, you will move to any floor. For example, you will not receive it when the Curtain opening is active... 1. Open the project. 2. For example, go to the ground floor. 3. Get report
 
Hakan, let me explain the problem again, after the report from any floor or the whole project option, the ide report opens, but the pages are blank.
 
Problem solved by selecting another printer instead of default printer... Driver update recommended for default printer...
 
You must log in or register to reply here.
Back
Top