reinforcement increase in the column

[inci]

I'm still working on the project, but there is an increase in reinforcement on the S16-S19 columns on the ground floor. What could be the reason, I wonder if there is a problem in modeling, I would be glad if you could help me.

You do not have permission to view link Log in or register now.

 

[YasinTezel]

Hello, There may be an increase in reinforcement on the mezzanine floor, especially after the rigid floor. If you analyze by selecting the option I marked in the Reinforced Concrete Column parameters, the reinforcement selection for the lower floors will be made by considering the upper floor.

 

[celikus]

Hi, There may be reinforcement increase in the mezzanine floor, especially after the rigid floor. If you analyze by selecting the option I marked in the Reinforced Concrete Column parameters, the reinforcement selection for the lower floors will be made by considering the upper floor.

Is this option available in ide7 ?

 

[YasinTezel]

Option 8 was added in Version. In the 7th version, the reinforcements can be changed by the user from the Column reinforced concrete dialog.

 

[inci]

Hi, There may be an increase in reinforcement on the mezzanine floor, especially after the rigid floor. If you select the option I marked in the Reinforced Concrete Column parameters, the selection of reinforcement for the lower floors will be made by considering the upper floor.

Thank you for your reply, Mr. Yasin