Reinforced Concrete 8.61 Shear Shear Safety

B

BURAK AKTÜRK

New Member
Hello. I am a user of İdecad Reinforced Concrete 8.61. In this project, I could not ensure the cutting safety of the P02 curtain on the ground floor. Can you help me how to solve this situation? At the same time, I am getting the section insufficient error for this curtain, but no matter how much I enlarged, I could not prevent the problem. Also, in the same project, there is a raft foundation problem. I could not pass the foundation with a thickness of 50 cm, what am I doing wrong, if you can help me, I would be very pleased. Thank you very much in advance download link:
You do not have permission to view link Log in or register now.
 
Re: Reinforced Concrete 8.61 The Problem About Shear Shear Safety HELLO BURAK BEY. I have also reviewed your previous projects. You do not consider the geometry controls. First of all, you need to correct them. It says what kind of error there is on which floor.
You do not have permission to view link Log in or register now.
You do not have permission to view link Log in or register now.
There are errors and glitches in the definition of tiles. You have defined tiles on top of each other, so there is another tile on top of each other. There are also faulty beam panel intersections, if you correct the errors in the geometry controls, I think it will not give an error. good work
 
Re: Reinforced Concrete 8.61 The Problem About Shear Shear Safety Hello actombo, I downloaded it and checked, it says there is no error in the geometry control. Did you check the last project? Maybe it has been fixed. Unver ÖZCAN
 
Re: Reinforced Concrete 8.61 The Problem About Curtain Shear Safety Hello Unver, I opened the ide7 file and looked. There were errors in it.
 
Re: The Problem About Reinforced Concrete 8.61 Shear Shear Safety
"unver":3h1d0lph" said:
8.61 does not show any error. There are no errors in the errors section.
Click to expand...
 
Re: The Problem About Reinforced Concrete 8.61 Curtain Shear Safety I fixed and uploaded ide7 and ide8.61 not giving any errors, I checked. 1- I added an apartment to the foundation as much as the foundation depth. 2- I deleted and redrawn the beams and floors 3- I adjusted the head reinforcement settings of the curtains 4- I chose the system mixed, this way it does not give an error.
You do not have permission to view link Log in or register now.
 
Re: The Problem About Reinforced Concrete 8.61 Shear Shear Safety Hello, the project was drawn in version 8.61; Since there are data entry differences between version 7 and version 8.61, it will not be very accurate to evaluate it over version 7 (in 7 version, errors caused by data entry differences should be eliminated.) [*]There is a problem in the connection of curved beams and straight beams on the A axis of your project. Intersect the nodal points in the picture with each other. [*]There may be several solutions for the curtain cut-off safety issue. Increasing the concrete class, increasing the dimensions of the other columns and curtains to reduce the shear force on the curtain, etc. things can be done. [*]When you open the reinforced concrete design raft foundation window, some of your additional reinforcements are not sufficient in the additional reinforcements tab. their reinforcement diameter can be increased or their spacing can be reduced.
 
Re: Reinforced Concrete 8.61 The Problem About Shear Shear Safety First of all, I would like to thank each and every one of you. I have saved it as an old version and added it so that users who draw in version 8.61 and use 7 can also review it. But when I convert it to version 7, there is some nonsense as Ibrahim mentioned, so the evaluations based on what I have drawn on 8.61 will be more accurate. Thank you very much, I will try the improvements you mentioned and reply again.
 
You must log in or register to reply here.
Back
Top