Raft Fundamental Errors

Ü

ÜNAL

New Member
Hello friends. I am still at the stage of learning the İdecad program. After modeling the structural system of a building consisting of 13 floors and making the necessary adjustments, I had an analysis done. I corrected some of the errors that occurred as a result of the analysis. I couldn't fix the ) error. I look at the additional accessories section and increase the reinforcements, but it still does not improve. What kind of way should I follow? Thank you for your help. Project link :
You do not have permission to view link Log in or register now.
9CGuRc.png
SxOtHg.png
wGkzeb.png
 
Hello. My suggestions: --1. Remove the ticks of the basement is not rigid, --Your floor safety must be approximately 23 t/m2 in order to recover the ground safety in G+Q+EY2 loading, --Rat thickness should be slightly increased in a 16-storey building, --Ticks in the columns should be removed, --The top in the geometry control is faulty Fix column layout, Corrected project is attached. Make an account and check. Unver ÖZCAN
 
In addition: P01-P02-p03-P04 etc. Do not define columns at the heads and intersections of curtains. The program will automatically create the curtain end zones according to the conditions specified in TDY 2007 article 3.6.1.2. Good work
 
You must log in or register to reply here.
Back
Top