Project Review

lilahmiharbi

lilahmiharbi

New Member
Hello friends, can you review the project below and tell me what's missing? The building to be constructed is in the 4th degree earthquake zone and is a 3-storey building. Due to the level difference between the front of the building and the back of the building, in addition to a basement, we built a half basement under the basement.
 
Mr. lilahmiharbi MY SUGGESTIONS 1- Rebuild your static system. Such a system is very bad, 2- Take into account the places I have given formwork plan errors in the appendix in the new formwork plan, (don't make cantilevers in the floor plan, the K04 beam is too long and there are too many pierces.) 3- The upper rigid floor number should be -3, 4- You can't fit the ladder on the ribs, 5- use the option to solve the ladder with the structure, 6- Fix the support conditions, 7- Read the answers I gave to this type of mistakes before. WE'LL FIX THESE, LOOK AGAIN. Take it easy Unver ÖZCAN
 
I changed the carrier system. but there is something i want to ask. If we do not get an error when we analyze in the idecad program, does it not mean that we can safely build this structure?
 
Greetings, Friends, whether you solve it with ideCAd or Domestic and International programs, if the result of the analysis does not give you an error, it does not mean that the structure I have built is not perfect. This does not just give an error according to the program criteria of the structure you have installed. you will make an idea by looking at the results of the analysis (take a look at the engineered structure again) and decide accordingly. As with every request, there are written and unwritten rules.
 
You must log in or register to reply here.
Back
Top