Pool Drawing

[sC.oUT]

Hello friends.. I received a pool project, but I have never drawn a pool before. General information is 12.5m by 25.00m. It has a depth of 2.20 cm and one of the short sides has a step of 150 cm.. My idecad version is 7.022. I would be glad if I have a friend who can help. or at least if you tell me what to pay attention to in the drawing of the pool, I would appreciate it..

 

[sC.oUT]

Re: Pool Drawing - Urgent I made an analysis from the pool analysis tab, over the model I created, but I can't see the reinforcements and the loads acting on the pool surfaces. Where do we look for them?

 

[Levent Özpak]

Re: Pool Drawing - Urgent

Hello friends.. I have a pool project, but I have never drawn a pool before.. General information 12.5m by 25, It has a depth of 00 m. It has a depth of 2.20 cm and there is a 150 cm step on one of the short sides.. My idecad version is 7.022. I would appreciate if there is a friend who can help. Or at least I would appreciate it if you could tell me what should be considered in pool drawing..

Hello, There is no possibility of reinforcement design and drawing in the pool created with the Pool command. If the pool is rectangular, you can model it with beamless raft foundations and panels, you can affect soil and water loads. Information about load definition can be obtained from the links below.

You do not have permission to view link Log in or register now.

You do not have permission to view link Log in or register now.

Good work

 

[redoaşkale]

Re: Pool Drawing - Urgent I read what you wrote about pool drawing in the forum. I just have a question. When we model the pool as a raft foundation and a panel, and select the dimensions according to the analysis values we made in the program, I get an insufficient section warning in the report. Is it possible for you to make a simple example and add it to the site?

 

[Levent Özpak]

Re: Pool Drawing - Urgent

I read what you wrote about pool drawing in the forum. I just have a question when I model the pool as a raft foundation and panel, when I choose the dimensions according to the analysis values we made in the program. I get a warning of insufficient section in the report.Is it possible for you to make a simple example and add it to the site?

What kind of inadequacy do you get? Attach the project file, let's examine it.

 

[mkrts88]

Re: Pool Drawing - Emergency

There is no equipment design and drawing facility in the pool created with the pool command. If the pool is rectangular, you can model it with beamless raft foundations and panels and affect soil and water loads.

Why is Mr. Levent absent? So why is such a simple feature not available in idecad? Will it be added?

 

[hamdiyakut]

I'm trying to make an inlet pumping chamber for a wastewater treatment plant, I thought I could model it as a pool, but it doesn't give static results in the pool toolbar, how can I model it?