Perimeter wall thickness of the elevator shaft

S

serhatmuh

New Member
To create a foundation at a different level under the elevator shaft, create a space under the elevator perimeter curtains with the "floor gap" command after defining your raft floor. Then create a closed area with the edge of the raft slab on this place where you define a gap. Place a new raft floor in this enclosed space. Set the level by entering the raft flooring properties. Calculation axes and working distances of raft floors can be arranged as in the sample project. but how can I define and solve the circumferential wall thickness of the elevator shaft in 75 cm system here? imageshack.us/my.php?image=111asd.jpg]
111asd.jpg
[/url]
 
We will model the elevator curtains as acceptance and solve the superstructure interactively. We will build the system under the elevator shaft on a second floor, you can get a rigid basement on that floor. You can increase the curtain thickness on the top floor. It just needs a little attention. Since there will be a difference in thickness with the curtains on the upper floor, you need to define the core curtains from the middle. Thus, the continuity of the vertical system will be ensured.
 
You must log in or register to reply here.
Back
Top