"2m projects" said:Hi; A problem has arisen in your definition of stairs and in the creation of calculation axes, your stairs are arranged in accordance with the static project and analysis can be made. The model is attached as V10.20.You do not have permission to view link Log in or register now.Best regards.[/quote Thank you. But why did this problem occur how many times I tried. I also watched the video. I couldn't figure out where I went wrong
What do you think about modeling?"2m project":3mws4q6o" said:Hi; There was a problem in your definition of stairs and in the creation of calculation axes, your stairs were arranged in accordance with the static project and analysis can be done. Model is attached as V10.20.You do not have permission to view link Log in or register now.Best regards.
In your project, the stair arms are not connected to the intermediate landing. Also, the stair supports are defined incorrectly. While determining the support conditions for the solution together with the structure, it should be determined that the stair edge is only attached to that element, the other carrier elements should be left blank. Solution should be made according to the semi-rigid diaphragm method in order to connect the edges of the ladder to the flooring. The routes where the ladder is formed and the sample ladder are attached. Good work"sonsamuray":nfp65zee" said:It gives trouble when I solve the building with ladder. I watched the videos but I couldn't solve the problem.You do not have permission to view link Log in or register now.I would appreciate your help. Good work
You can create the staircase as in the example. Example last area is defined as landing. In the Areas tab in the stair properties, for AREA2, the line "Last step at upper level level" is unchecked ."hhaticeakca":1zywu2ax" said:When drawing stairs, there should be only one step in the last area, when you make 1 the number of steps from the fields, the stairs slide, can you help? The same problem occurs when arranging a ready-made staircaseYou do not have permission to view link Log in or register now.
"hhaticeakca":28f5yk1a" said:Can you save it in the old version and send it again? The version of the stair reinforcement axes must be defined separately for each arm and landing. It is not necessary to define the reinforcement axis in the direction of distribution in the stair arm.
German 
French 
Spanish 
Portuguese 
Italian 
Arabic 
Russian 
Japanese 
Turkish