Modeling of a masonry roof on a reinforced concrete building

[rcp52]

Friends, a masonry roof is planned on a new five-storey beamed building to be drawn. Do we count the masonry attic from the building height? Another question is How is this masonry attic modeled in idecad, where the wall load is defined where the walls come from?

 

[unver]

Hello

How to model masonry loft on idecade define wall load where walls come from

At loft You cannot model masonry wall and reinforced concrete slab [/b] on , but on beams of a lower floor (wall loads+wooden roof load should be taken) by modeling the wall and making the roof flooring wooden Ünver ÖZCAN

 

[asenyapitasarim]

hello, let's think we are doing such a modeling, what would be the behavior if there was no frame system, I think it is not the right approach, the walls have no connection

 

[asenyapitasarim]

Hello, Mr. Ismail, I have encountered such situations many times. ide is doing suitable modeling for carcass systems.

 

[rcp52]

Since the columns do not come out, will we count from the height of the building?

 

[asenyapitasarim]

Can idecad officials share their views on this issue, what is ismail's comments on this subject :?: In case of a masonry roof, BYS WILL NOT BE CONSIDERED I think that the WALLS should NOT BE CONNECTED WITH THE FRAME, but I would like to hear different opinions, with respect.

 

[Ismail Hakki Besler]

Do not add any masonry on the reinforced concrete structure in any way. I suggest you make a steel roof.