Making inclined columns in the attic

M

Medeniyetmuhendisi

New Member
In the attic floor I want to bend the columns in the same direction with 1 m inclination, but as in the photo, 2 columns bend in the y direction and the common column in the x direction. I want to bend them all in the y direction. How do I tilt the columns in the direction I want? Thanks in advance, take it easy
 
Re: making inclined columns in the attic Hello, First of all, enter the column settings and set the inclination parameter. Press OK and exit. Insert the column with the first click. The second click allows you to adjust the angle of the column. You can draw the column inclined in the direction you want.
 
I have one more question, I want to put slanted tiles on the places shown in the photo, how can I do this? i know how to create a floor and bevel but i didn't know how to fit it here
 
Model beams and slabs as straight without leveling, then select the elements to be bent using the Bevel objects command in the Tile toolbar. You can incline objects by entering the direction and elevation difference. Sample project is attached.
 
You must log in or register to reply here.
Back
Top